The external tissues of plants and animals are colonized by microbial communities termed microbiota. When organisms are exposed to environmental pollutants, these substances will therefore... Show moreThe external tissues of plants and animals are colonized by microbial communities termed microbiota. When organisms are exposed to environmental pollutants, these substances will therefore encounter microbiota at the exposure interface. Many antimicrobial substances have been found to disturb beneficial interactions between microbiota and the host, thereby impairing host health. Nanomaterials exhibit nanoscale properties that could affect host health in two additional, understudied, microbiota-dependent ways. Firstly, owing to their large surface area, adsorption interactions between nanomaterials, microbial metabolites and microbes could alter the identity and colloidal stability of nanomaterials, and may influence the dispersal of microbes. Secondly, the immuno-modulatory effects of microbiota could affect the sensitivity of hosts to immunotoxic nanomaterials. In this dissertation, we use a combination of computational techniques and zebrafish larvae experiments to unravel and quantify these interactions. We predict the affinity of microbial metabolites to carbon and metal nanomaterials, and show that titanium dioxide nanoparticles can affect the dispersal of microbes through aquatic ecosystems, and across different life stages of oviparous animals. Additionally, we provide insight into microbiota-dependent signaling pathways that affect the sensitivity of zebrafish larvae to particle-specific, immunotoxic effects of silver nanoparticles. Altogether, these results contribute to mechanistic pathways for microbiota-inclusive nanomaterial safety assessment. Show less
Ingested nanomaterials are exposed to many metabolites that are produced, modified, or regulated by members of the enteric microbiota. The adsorption of these metabolites potentially affects the... Show moreIngested nanomaterials are exposed to many metabolites that are produced, modified, or regulated by members of the enteric microbiota. The adsorption of these metabolites potentially affects the identity, fate, and biodistribution of nanomaterials passing the gastrointestinal tract. Here, we explore these interactions using in silico methods, focusing on a concise overview of 170 unique enteric microbial metabolites which we compiled from the literature. First, we construct quantitative structure–activity relationship (QSAR) models to predict their adsorption affinity to 13 metal nanomaterials, 5 carbon nanotubes, and 1 fullerene. The models could be applied to predict log k values for 60 metabolites and were particularly applicable to ‘phenolic, benzoyl and phenyl derivatives’, ‘tryptophan precursors and metabolites’, ‘short-chain fatty acids’, and ‘choline metabolites’. The correlations of these predictions to biological surface adsorption index descriptors indicated that hydrophobicity-driven interactions contribute most to the overall adsorption affinity, while hydrogen-bond interactions and polarity/polarizability-driven interactions differentiate the affinity to metal and carbon nanomaterials. Next, we use molecular dynamics (MD) simulations to obtain direct molecular information for a selection of vitamins that could not be assessed quantitatively using QSAR models. This showed how large and flexible metabolites can gain stability on the nanomaterial surface via conformational changes. Additionally, unconstrained MD simulations provided excellent support for the main interaction types identified by QSAR analysis. Combined, these results enable assessing the adsorption affinity for many enteric microbial metabolites quantitatively and support the qualitative assessment of an even larger set of complex and biologically relevant microbial metabolites to carbon and metal nanomaterials. Show less
This thesis focuses on the synthesis, characterization and performance towards CO2 electroreduction of mono and bi-metallic particles based on p-block metals. With an industrial perspective in mind... Show moreThis thesis focuses on the synthesis, characterization and performance towards CO2 electroreduction of mono and bi-metallic particles based on p-block metals. With an industrial perspective in mind, we try to synthesize particulate, high surface area materials with clean, scalable synthesis methods where possible and test their performance in H-Cell and gas diffusion electrode flow cell configurations. With a combination of characterization techniques, we find possible explanations for the catalytic behaviors. Show less
Similarity assessment is one of the means of optimally using scarcely available experimental data on the fate and hazards of nanoforms (NFs) for regulatory purposes. For a set of NFs that are shown... Show moreSimilarity assessment is one of the means of optimally using scarcely available experimental data on the fate and hazards of nanoforms (NFs) for regulatory purposes. For a set of NFs that are shown to be similar it is allowed in a regulatory context to apply the information available on any of the NFs within the group to the whole set of NFs. Obviously, a proper justification for such a similarity assessment is to be provided. Within the context of exemplifying such a justification, a case study was performed aimed at assessing the similarity of a set of spherical metallic NFs that different with regard to chemical composition (three metals) and particle size (three different sizes). The endpoints of assessment were root elongation and biomass increase of lettuce (Lactuca sativa L.) seedlings and exposure assessment was performed in order to express the actual exposure concentration in terms of time-weighted average particle concentrations. The results of the study show that for the specific endpoints assessed, chemical composition is driving NF toxicity and this is mostly due to impacts on the fate of the NFs. On the other hand, particle size of Cu NFs had a negligible impact on the dose-response relationships for the specific endpoints assessed. It is thus concluded that hazard data available on spherical Cu NF tested in our case can be used to inform on the hazards of any spherical Cu NF within the size range of 25–100 nm, but only applies for the certain endpoints. Also, toxicity data for the Cu2+-ion are suited for such a similarity assessment. Show less
Particles are omnipresent in biopharmaceutical products. In protein-based therapeutics such particles are generally associated with impurities, either derived from the drug product itself (e.g.... Show moreParticles are omnipresent in biopharmaceutical products. In protein-based therapeutics such particles are generally associated with impurities, either derived from the drug product itself (e.g. protein aggregates), or from extrinsic contaminations (e.g. cellulose fibers). These impurities can affect product stability, as well as cause adverse effects once introduced into the human body. Particulate impurities are present over a wide range of sizes (from nanometers to millimeters) making them difficult to characterize by using a single method.Novel drug products may also contain particles that act as the active pharmaceutical ingredient (e.g., living cells) or a drug delivery vehicle (e.g., lipid nanoparticles). Unwanted immunotoxicity and inconsistent in vivo functionality can result from particle instability and aggregate formation. Therefore, the efficacy and safety of these therapeutics is dependent on the particle composition, quantity and size distribution.Consequently, well-established methods are required to quantify and characterize particles in the submicron- and micron-size ranges. In this thesis, we developed new approaches which allow for comprehensive characterization of the particle populations present in biopharmaceutical products, both as impurities or as API. Furthermore, the performed work focused on comparing different particle characterization techniques to allow a better understanding of the limitations and strengths of each method applied. Show less
In surface science there is great effort to move from studying simple, flat model surfaces in vacuum to investigating more complex model catalysts in gas environments (in situ). This thesis gives... Show moreIn surface science there is great effort to move from studying simple, flat model surfaces in vacuum to investigating more complex model catalysts in gas environments (in situ). This thesis gives three examples of such studies using microscopy and spectroscopy.Exposure of ZnO(10-10) to moderate pressures of water in an in situ scanning tunneling microscope reveals that the surface roughens. The flat ZnO(10-10) is thus only conditionally suited as a model catalyst for reactions involving water.In the same microscope, surface gold oxide formation is observed on TiO2/Au(111) during CO oxidation at 1 bar pressure. Comparisons to the Au(111) surface suggest that the titania does not supply atomic oxygen to the Au(111) substrate as part of the reaction mechanism of the CO oxidation.Co(0001) is investigated as a model catalyst for Fischer-Tropsch synthesis, the reaction of CO and H2 to form hydrocarbons. In this thesis the oxidation behavior of the cobalt and the adsorption of carbon species during the reaction are investigated using near-ambient pressure X-ray photoelectron spectroscopy.Generally, this thesis exemplifies the significant influence that small concentrations of contaminants in gases and materials can have on the structure and behavior of surfaces in in situ studies. Show less
The biological application of photoactivatable ruthenium anticancer prodrugs is limited by the need to use poorly penetrating high-energy visible light for their activation. Upconverting... Show moreThe biological application of photoactivatable ruthenium anticancer prodrugs is limited by the need to use poorly penetrating high-energy visible light for their activation. Upconverting nanoparticles (UCNPs), which produce high-energy light under near-infrared (NIR) excitation, can solve this issue, provided that they form stable, water (H2O)-dispersible nano-conjugates with the prodrug and that there is efficient energy transfer from the UCNP to the ruthenium complex. Herein, we report on the synthesis and photochemistry of the ruthenium(II) polypyridyl complex [Ru(bpy)(2)(3(H))](PF6)(2) ([1](PF6)(2)), where bpy = 2,2-bipyridine and 3(H) is a photocleavable bis(thioether) ligand modified with two phosphonate moieties. This ligand was coordinated to the ruthenium center through its thioether groups and could be dissociated under blue-light irradiation. Complex [1](PF6)(2) was bound to the surface of NaYF4:Yb3+,Tm3+@ NaYF4:Nd3+@NaYF4 core-shell-shell (CSS-)UCNPs through its bis(phosphonate) group, thereby creating a H2O-dispersible, thermally stable nanoconjugate (CSS-UCNP@[1]). Conjugation to the nanoparticle surface was found to be most efficient in neutral to slightly basic conditions, resulting in up to 2.4 x 10(3) Ru-II ions per UCNP. The incorporation of a neodymium-doped shell layer allowed for the generation of blue light using low-energy, deep-penetrating light (796 nm). This wavelength prevents the undesired heating seen with conventional UCNPs activated at 980 nm. Irradiation of CSS-UCNP@[1] with NIR light led to activation of the ruthenium complex [1](PF6)(2). Although only one of the two thioether groups was dissociated under irradiation at 50 W.cm(-2), we provide the first demonstration of the photoactivation of a ruthenium thioether complex using 796 nm irradiation of a H2O-dispersible nanoconjugate. Show less
This thesis aimed to investigate the impact of exposure dynamics, relative contributions of ENPs(particle) and ENPs(ion), and dosing regimens on the toxicity of ENPs varying in different physico... Show moreThis thesis aimed to investigate the impact of exposure dynamics, relative contributions of ENPs(particle) and ENPs(ion), and dosing regimens on the toxicity of ENPs varying in different physico-chemical properties, on the composition and functioning of soil microbial communities. The physico-chemical properties of ENPs could change their fate, and the exposure dynamics thus need to be taken into consideration for realistically characterizing the time-variable exposure in assessing toxicity. The metabolic profile of microbial community could change according to ENPs shapes, with nanoplates being more toxic than nanospheres and polygons. Regarding the microbial community composition, the effect of ENPs depended on exposure time and concentration. However, the alterations in community composition were not expressed in terms of community functioning, which indicates that genus specific changes occurred but not yet necessarily reflected biological significance with regard to community functioning. Functional redundancy might contribute to community tolerance to ENPs exposure. When exposed to more realistic ENPs exposure scenarios with multiple dosing frequencies instead of one-time injection, the repetitive exposure with low-dosing could induce a tendency towards larger alteration of both community composition and functioning. Our study thus provided further insights in understanding the impact of NPs on soil microbial communities towards environmentally relevant assessment. Show less
Cathodic corrosion is a relatively unknown phenomenon that can severely etch metallic electrodes at cathodic (negative) potentials. In spite of these remarkable changes that are caused by cathodic... Show moreCathodic corrosion is a relatively unknown phenomenon that can severely etch metallic electrodes at cathodic (negative) potentials. In spite of these remarkable changes that are caused by cathodic corrosion, the phenomenon is stil not fully understood. Cathodic corrosion is therefore the focus of this PhD thesis. The first three experimental chapters of the thesis focus on characterizing platinum, rhodium and gold electrodes before and after cathodic corrosion in a variety of working solutions. In doing so, these chapters establish surprisingly mild corrosion onset potentials and reveal an etching anistropy that depends on the cation in the working solution. Additional density functional theory calculations suggest a similarly significant role for adsorbed hydrogen. These result suggest the existence of ternary metal hydrides during cathodic corrosion. The role of hydrides is further studied in the fourth experimental chapter through X-ray absorption spectroscopy. These four fundamental chapters are followed by two more applied chapters. The first of these tailors the activity of a platinum single crystal towards oxygen reduction, by using cathodic corrosion. The second applied chapter uses cathodic corrosion to create and thoroughly characterize alloyed nanoparticles. Combined, these fundamental and applied chapters provide valuable new information towards understanding and applying cathodic corrosion. Show less
In summary, the collective results described in this thesis show that nanoparticulate vaccines can be delivered intradermally by coated and hollow microneedles and evoke antigen-specific immune... Show moreIn summary, the collective results described in this thesis show that nanoparticulate vaccines can be delivered intradermally by coated and hollow microneedles and evoke antigen-specific immune responses. The choice of both the nanoparticles and the microneedle(s) could have important influences on the immune responses. Microneedle arrays coated with antigen loaded and lipid bilayer fused mesoporous silica nanoparticles (MSNs) could be a promising system for convenient and fast intradermal delivery of protein antigen, although our results indicate that the system needs to be improved in order to obtain optimal immune responses. Moreover, antigen and adjuvant loaded nanoparticles can increase IgG2a (Th1) and CD8+ responses after intradermal delivery by hollow microneedles. This effect depends on the type and the physicochemical characteristics of the nanoparticles, in which smaller size and controlled release properties of antigen and adjuvant were found to correlate with the stronger effect. Finally, the combination of separate antigen loaded and adjuvant loaded nanoparticles may be as efficient as the antigen and adjuvant co-encapsulated nanoparticles for modification of the immune responses following intradermal immunization. Show less
Synthetic long peptides (SLP) derived from cancer-associated antigens hold great promise as well-defined antigens for cancer immunotherapy. Clinical studies showed that SLP vaccines have... Show more Synthetic long peptides (SLP) derived from cancer-associated antigens hold great promise as well-defined antigens for cancer immunotherapy. Clinical studies showed that SLP vaccines have functional potency when applied to pre-malignant stage patients, but need to be improved for use as a therapeutic intervention against tumours. So far, SLPs have been administered in Montanide ISA-51, a water-in-oil formulation with reported important drawbacks and induced local side effects. Therefore, there is an urgent need for replacement of Montanide by more potent and safe alternatives. In this thesis, the concept of cationic liposome-based formulations was introduced, as the backbone for improved delivery of SLPs for cancer therapeutic vaccination. The developed formulation’s ability to induce efficient immune responses able to control tumour outgrowth in aggressive independent tumour models, makes cationic liposomes a very promising platform for SLP-based cancer immunotherapy. Their flexibility regarding the properties of loaded SLPs, their relative inexpensive production and the possibility to administer them via different delivery routes are all in favour for liposomal SLP-based cancer immunotherapy to become reality soon. Show less
Synthetic long peptides (SLPs) derived from cancer antigens hold great promise as well-defined antigens for immunotherapy of cancer. However, the formulation of SLPs for in vivo administration... Show moreSynthetic long peptides (SLPs) derived from cancer antigens hold great promise as well-defined antigens for immunotherapy of cancer. However, the formulation of SLPs for in vivo administration still needs to be improved. So far, SLPs have been formulated in Montanide-based water-in-oil emulsions in (pre-)clinical trials. However, the use of Montanide as an adjuvant has some important limitations, such as: non-biodegradability; significant local side effects; poor control of release rate; lack of specific dentritic cell (DC)-activating capacity; and the presence of organic solvents (needed to dissolve the peptides prior to mixing with the adjuvant) in the final formulation. Therefore, alternative formulations containing an effective delivery system for peptide-based cancer vaccines are highly needed. Among the numerous vaccine delivery systems, poly(lactic-co-glycolic acid) (PLGA) biodegradable particulate delivery systems are particularly interesting because they are biocompatible; can protect soluble antigens from degradation and rapid clearance once administered; allow for co-encapsulation of (multiple) antigens and adjuvants; and mimic the size and structure of a pathogen, being more efficiently taken up by DCs than soluble antigen. This thesis describes fundamental studies on the design and applicability in a preclinical setting of PLGA-based particulate formulations for the delivery of SLP-based cancer vaccines. Show less
Our study emphasizes the importance of two toxicity-modifying factors (the composition of the surrounding exposure media and mixture effects) in the assessment of toxic effects of metals and... Show more Our study emphasizes the importance of two toxicity-modifying factors (the composition of the surrounding exposure media and mixture effects) in the assessment of toxic effects of metals and metal-based NPs on higher plants. Based on the affinity of metals for binding sites on the biotic ligand at the water-organism interface, the mechanistic models we developed provide better links with the toxicity of metal mixtures. We also recommend that finding a statistically significant deviation from additivity can be the starting point for further mechanistic research concerning toxicologically relevant interactions between substances, instead of the endpoint of research used so far. As an extension of the research discussed in the third chapter of this thesis, the commonly known model for the toxicity of mixtures was proven to be suitable for preliminarily assessing the effects of metal-based NPs on terrestrial organisms. The experimental design of nested combinations helps establish a more realistic exposure scenario for the environment and makes it possible to identify where and how chemical-chemical interactions occur with metal-based NPs. Consequently, our findings enrich the rapidly evolving field of toxicology regarding metals and metal-based NPs. Show less
Nanoparticles (NPs) exhibit special physicochemical properties compared to bulk particles. The difference in properties could, in principle, produce different effects on organisms. It is therefore... Show moreNanoparticles (NPs) exhibit special physicochemical properties compared to bulk particles. The difference in properties could, in principle, produce different effects on organisms. It is therefore important to determine the relationship between the physicochemical characteristics of NPs and their toxicity profile, by means of experimental testing. Experimental toxicity testing data can also be used to find the best dose metric for the responses induced by NPs, which was the purpose of the research presented in this thesis. Furthermore, this thesis aims to move forward from toxicity testing primarily in animal models to computational dose metric modeling. Show less
Nature__s own building block, peptide/protein derived materials have been of great interest for supramolecular chemists. The amino acids in peptides/proteins are linked via amide bonds, which makes... Show moreNature__s own building block, peptide/protein derived materials have been of great interest for supramolecular chemists. The amino acids in peptides/proteins are linked via amide bonds, which makes them more stable against degradation as compared to other natural materials such as oligonucleotides. Peptides adopt a secondary structure which is determined by their amino acid sequence resulting in a structure with a specific fold like a beta sheet, a helix or a random coil conformation.These secondary structures can govern the supra-molecular structure of the macromolecule to achieve specific function. Peptides can be short, such as dipeptides or as long as a small protein, which are able to selfassemble into a designed nanostructure and thus providing a wide choice of biomaterials for a chemical biologist. In last decade, peptides have been shown to have great versatility and inherent high affinity for their target to carry out various functions which is the scope of this thesis presented here. Show less
This project has dealt with the mechanistic study of the electrocatalytic nitrite reduction, the selectivity-determining step of nitrate reduction. Nitrate is a polluting ion targeted by wastewater... Show moreThis project has dealt with the mechanistic study of the electrocatalytic nitrite reduction, the selectivity-determining step of nitrate reduction. Nitrate is a polluting ion targeted by wastewater remediation; electrochemistry strives to achieve selectivity to harmless products (N2). A multi-pronged approach has been followed, aimed at establishing the influence of several variables (electrocatalyst material, surface structure, pH and electrode potential) on the catalytic activity and the product distribution, which has been determined with in situ analytical techniques (mass spectrometry and infrared spectroscopy). The molecular underpinnings of nitrite reduction have thereby been unravelled for transition metals, showing that an optimal catalytic performance is achieved when metals intermediate affinities to reaction intermediates (Sabatier Principle). The all-important concept of structure sensitivity also applies to nitrite reduction at Pt electrodes, although only in alkaline media: a Pt(100) single-crystal is the sole Pt surface able to achieve the desired direct conversion of nitrite into 100% N2. Such selectivity is unparalleled for a simple monometallic surface and is an outstanding finding. Additionally, the nitrite-reducing performance of bio-inspired catalysts, (electroactive metalloporphyrins) was investigated. A further side-project of this PhD thesis has also been the electrochemical characterization of preferentially-oriented cuboid Pt nanoparticles synthesized with the innovative __cathodic corrosion__. Show less
Microneedle-based transcutaneous immunisation is an appealing alternative to the classical manner of injecting vaccines by intramuscular or subcutaneous route. Importantly, as a consequence of the... Show moreMicroneedle-based transcutaneous immunisation is an appealing alternative to the classical manner of injecting vaccines by intramuscular or subcutaneous route. Importantly, as a consequence of the fact that the skin is in direct contact with the environment and should protect the body against pathogens, it contains more antigen presenting cells, such as dendritic cells than the muscles or subcutaneous tissue and thereby offers the possibility to induce a more effective immune response. The combination of microneedles and adjuvanted subunit vaccines may offer effective vaccination whereas ensuring patient safety and vaccine application in a painless manner. The principal aim of this thesis was to design subunit vaccine formulations that can be combined with microneedles for transcutaneous immunisation. The approaches described in this thesis have generated new insights into the main requirements for transcutaneous immunisation. Microneedles definitively have the potential to be an excellent utensil for the delivery of vaccines into the skin. However, the skin is a very elastic organ and the actual conduits formed by microneedle pre-treatment will be considerably smaller than the diameter of the microneedles. Therefore, a small antigen-adjuvant entity is the preferred formulation, as it will be transported efficiently through the microneedle conduits while it retains the co-delivery of antigen and adjuvant. Show less
Clearly gold deposited as nanoparticles on a support is a very active catalyst in contrast to bulk gold which does not show any catalytic activity. The question arises if this particle size effect... Show moreClearly gold deposited as nanoparticles on a support is a very active catalyst in contrast to bulk gold which does not show any catalytic activity. The question arises if this particle size effect is exclusively valid for gold catalysis or can a similar effect be found in other metals? In the research described in this thesis we investigated copper and silver based catalysts for similar particle size effects as for gold based catalysts. In contrast to gold bulk silver and copper are known to be active in catalysis and both metals are used as catalysts. Silver is the metal of choice for the formation of ethylene oxide from ethylene but also for the formation of formaldehyde in the BASF process. A Cu/Zn-based catalyst is used for the synthesis of methanol from CO and \hydrogen, and copper-based catalysts are also active in oxidation reactions. As the interaction between the gold nanoparticles with the additives is very important for the catalytic activity, the effect of additions of lithiumoxide and ceria have also been investigated for the silver and copper based catalysts. These additives stabilize the nanoparticles and ceria which is known for its oxygen storage and oxidation capacities and is one of the best additives for gold based catalysts. Various oxidation and dehydrogenation reactions have been investigated over copper, silver and gold based catalysts, which are presented in this thesis. In chapter 2 the preferential oxidation of CO is discussed. Chapter 3 deals with the selective oxidation of \ammonia. Chapter 4 is devoted to the oxidation and dehydrogenation of methanol. Chapter 5 presents the results of formation of ethylene oxide in the oxidation and dehydrogenation of ethanol on silver and copper based catalysts. In chapter 6 more results of ethanol dehydrogenation and oxidation on gold based catalysts are presented. Chapter 7 gives insight into the activity of gold based catalysts in oxidation and dehydrogenation of 1-propanol and 2-propanol. Show less
