Opalescence measurements are broadly applied to assess the quality and stability of biopharmaceutical products at all stages of development and manufacturing. They appear to be simple and straight... Show moreOpalescence measurements are broadly applied to assess the quality and stability of biopharmaceutical products at all stages of development and manufacturing. They appear to be simple and straight forward but detect complex light scattering phenomena. Despite a routine calibration step, opalescence values obtained with the same biopharmaceutical sample but on different instruments and/or with different methods may vary significantly. Since the reasons for this high variability are generally not well understood, comparison of opalescence results from different biopharmaceutical laboratories is difficult. Here, we characterized a comprehensive set of biopharmaceutically relevant samples with five opalescence methods to illustrate fundamental differences in method performance and explore the reasons for poor comparability. In addition, we developed a high-throughput method for measuring opalescence in a conventional light scattering plate reader that yields opalescence values in the same range as compendial methods. The presented results underline the impact of sample properties, instrument type, and calibration standards on the determined opalescence value. Based on our findings we provide recommendations for the appropriate application of each method during biopharmaceutical drug product development. Overall, our study contributes to an improved understanding of opalescence measurements in the biopharmaceutical field. Show less
Sample preparation for extraction of nanoscale plastic debris (NPD, size < 1 μm) from environmental samples is a critical step to prepare NPD for further identification and quantification.... Show moreSample preparation for extraction of nanoscale plastic debris (NPD, size < 1 μm) from environmental samples is a critical step to prepare NPD for further identification and quantification. Developing a NPD extraction method from soil matrices is particularly challenging due to the complexity of solid matrices. In the present study, we built upon the lessons learned from method development for extraction of microplastics and nanomaterials from environmental samples to develop a sample preparation method for extraction of NPD from soil matrices. The evaluation criteria for the extraction method are size distribution, particle number recovery, and particle mass recovery. Since there is no validated method available to trace and quantify the mass of NPD in complex matrices, we applied polystyrene particles doped with europium (Eu-PS NPs). Standard LUFA soil and field soil were spiked and mixed for 24 h with 1 mg of Eu-PS NPs and the particles were extracted from the matrices of the soils. The extraction method did not significantly influence the size distribution of the particles and the extraction agents did not degrade the Eu-PS NPs. Mass balance calculation suggested recoveries of 82 and 77% of the added Eu-PS NPs in LUFA soil and field soil, respectively. The number recoveries of the particles were 81 and 85% for LUFA soil and field soil, respectively. This method can be further optimized and used as the first building block to develop a generic sample preparation method for the extraction of NPD from soil samples. By combining this developed and verified extraction method with identification and quantification techniques, a fit-for-purpose workflow can be developed to quantify and subsequently understand the fate of NPD in soil. Show less
Leone, M.; Romeijn, S.; Slütter, B.; O'Mahony, C.; Kersten, G.; Bouwstra, J.A. 2020
Biomaterials used as matrix for dissolving micro needles (dMNs) may affect the manufacturing process as well as the potency of the active pharmaceutical ingredient, e.g. the immunogenicity of... Show moreBiomaterials used as matrix for dissolving micro needles (dMNs) may affect the manufacturing process as well as the potency of the active pharmaceutical ingredient, e.g. the immunogenicity of incorporated vaccine antigens. The aim of this study was to investigate the effect of the molecular weight of hyaluronan, a polymer widely used in the fabrication of dMNs, ranging in molecular weight from 4.8 kDa to 1.8 MDa, on the dissolution of microneedles in the skin in time as well as the antibody response in mice and T-cell activation in vitro. Hyaluronan molecular weight (HA-MWs) did not affect antibody responses (when lower than 150 kDa) nor CD4 + T-cell responses against model antigen ovalbumin. However, the HA-MWs had an effect on the fabrication of dMNs. The 1.8 MDa HA was not suitable for the fabrication of dMNs. Similarly, the 4.8 kDa HA generated dMN arrays less robust compared to the other HA-MWs requiring optimization of the drying conditions. Finally, higher HAMWs led to longer application time of dMN arrays for a complete dissolution of microneedles into the skin. Specifically, we identified 20 kDa HA as the optimal HA-MW for the fabrication of dMNs as with this MW the dMNs are robust and dissolve fast in the skin without affecting immunogenicity. Show less
Benne, N.; Leboux, R.J.T.; Glandrup, M.; Duijn, J. van; Lozano Vigario, F.; Neustrup, M.A.; ... ; Slütter, B. 2019
Regulatory T cells (Tregs) are vital for maintaining a balanced immune response and their dysfunction is oftenassociated with auto-immune disorders. We have previously shown that antigen-loaded... Show moreRegulatory T cells (Tregs) are vital for maintaining a balanced immune response and their dysfunction is oftenassociated with auto-immune disorders. We have previously shown that antigen-loaded anionic liposomescomposed of phosphatidylcholine (PC) and phosphatidylglycerol (PG) and cholesterol can induce strong antigenspecificTreg responses. We hypothesized that altering the rigidity of these liposomes while maintaining theirsize and surface charge would affect their capability of inducing Treg responses. The rigidity of liposomes isaffected in part by the length and saturation of carbon chains of the phospholipids in the bilayer, and in part bythe presence of cholesterol. We used atomic force microscopy (AFM) to measure the rigidity of anionic OVA323-containing liposomes composed of different types of PC and PG, with or without cholesterol, in a molar ratio of4:1(:2) distearoyl (DS)PC:DSPG (Young's modulus (YM) 3611 ± 1271 kPa), DSPC:DSPG:CHOL(1498 ± 531 kPa), DSPC:dipalmitoyl (DP)PG:CHOL (1208 ± 538), DPPC:DPPG:CHOL (1195 ± 348 kPa),DSPC:dioleoyl (DO)PG:CHOL (825 ± 307 kPa), DOPC:DOPG:CHOL (911 ± 447 kPa), and DOPC:DOPG(494 ± 365 kPa). Next, we assessed if rigidity affects the association of liposomes to bone marrow-deriveddendritic cells (BMDCs) in vitro. Aside from DOPC:DOPG liposomes, we observed a positive correlation betweenliposomal rigidity and cellular association. Finally, we show that rigidity positively correlates with Treg responsesin vitro in murine DCs and in vivo in mice. Our findings underline the suitability of AFM to measureliposome rigidity and the importance of this parameter when designing liposomes as a vaccine delivery system. Show less
Suitable methods and fit-for-purpose techniques are required to allow characterization of carbon-based nanomaterials (CB-NMs) in complex matrices. In this study, two methods were developed; a... Show moreSuitable methods and fit-for-purpose techniques are required to allow characterization of carbon-based nanomaterials (CB-NMs) in complex matrices. In this study, two methods were developed; a method for extraction and characterization of CB-NMs in biological media and a method for fractionation of natural organic matter (NOM) coated CB-NMs in environmental matrices. The former method was developed by extracting carbon nanotubes (CNTs: sized 0.75 × 3000 nm) and nanoplastics (sized 60, 200 and 600 nm) from eggshells and characterizing the extracted CB-NMs in terms of particle size distribution using asymmetrical flow field-flow fractionation (AF4) coupled with multi-angle light scattering (MALS). The latter method was developed using AF4-MALS to fraction NOM-coated CNT (sized 0.75 × 3000 nm) and nanoplastics (sized 60, 200 and 300 nm) in a simulated natural surface water and provide information about the size distribution of the CB-NM-NOM complexes. The developed AF4-MALS method successfully fractioned the CB-NM-NOM complexes based on hydrodynamic size and provided the size distribution of the complexes. The NOM corona did not shift significantly the median size of the CB-NMs. It influenced however the size distribution of the nanoplastics and CNTs. The sample preparation method failed to extract the CNTs (recovery < 20%) from the matrices of the eggshells while being successful for extracting the nanoplastics (recoveries > 60%). The AF4-MALS fractogram showed that the extraction method did not significantly influence the size distribution of the nanoplastics of 60 and 200 nm size, whereas the peak of 600 nm nanoplastics shifted towards a smaller hydrodynamic size. In conclusion, the developed sample preparation method followed by the developed AF4-MALS method can be applied for extraction, separation and characterization of CB-NMs in biological and environmental matrices. Thus, the methods have a high potential to be methods of choice to investigate CB-NMs in future studies. Show less
Leone, M.; Priester, M.I.; Romeijn, S.; Nejadnik, M.R.; Mönkäre, J.; O'Mahony, C.; ... ; Bouwstra, J.A. 2019
The purpose of this study was to optimize the manufacturing of dissolving microneedles (dMNs) and to increase the antigen loading in dMNs to investigate the effect on their physicochemical... Show moreThe purpose of this study was to optimize the manufacturing of dissolving microneedles (dMNs) and to increase the antigen loading in dMNs to investigate the effect on their physicochemical properties. To achieve this, a novel single-array wells polydimethylsiloxane mold was designed, minimizing antigen wastage during fabrication and achieving homogeneous antigen distribution among the dMN arrays. Using this mold, hyaluronan (HA)-based dMNs were fabricated and tested for maximal ovalbumin (OVA) content. dMNs could be fabricated with an OVA:HA ratio as high as 1:1 (w/w), without compromising their properties such as shape and penetration into the ex vivo human skin, even after storage at high humidity and temperature. High antigen loading did not induce protein aggregation during dMN fabrication as demonstrated by complementary analytical methods. However, the dissolution rate in ex vivo human skin decreased with increasing antigen loading. About 2.7 µg OVA could be delivered in mice by using a single array with an OVA:HA ratio of 1:3 (w/w). Intradermal vaccination with dMNs induced an immune response similar as subcutaneous injection and faster than after hollow microneedle injection. In conclusion, results suggest that (i) the polydimethylsiloxane mold design has an impact on the manufacturing of dMNs, (ii) the increase in antigen loading in dMNs affects the microneedle dissolution and (iii) dMNs are a valid alternative for vaccine administration over conventional injection. Show less
Yu, M.; Silva, T.C.; Opstal, A. van; Romeijn, S.; Every, H.A.; Jiskoot, W.; ... ; Ottens, M. 2019
In this study, we developed a microfluidics method, using a so-called H-cell microfluidics device, for the determination of protein diffusion coefficients at different concentrations, pHs, ionic... Show moreIn this study, we developed a microfluidics method, using a so-called H-cell microfluidics device, for the determination of protein diffusion coefficients at different concentrations, pHs, ionic strengths, and solvent viscosities. Protein transfer takes place in the H-cell channels between two laminarly flowing streams with each containing a different initial protein concentration. The protein diffusion coefficients are calculated based on the measured protein mass transfer, the channel dimensions, and the contact time between the two streams. The diffusion rates of lysozyme, cytochrome c, myoglobin, ovalbumin, bovine serum albumin, and etanercept were investigated. The accuracy of the presented methodology was demonstrated by comparing the measured diffusion coefficients with literature values measured under similar solvent conditions using other techniques. At low pH and ionic strength, the measured lysozyme diffusion coefficient increased with the protein concentration gradient, suggesting stronger and more frequent intermolecular interactions. At comparable concentration gradients, the measured lysozyme diffusion coefficient decreased drastically as a function of increasing ionic strength (from zero onwards) and increasing medium viscosity. Additionally, a particle tracing numerical simulation was performed to achieve a better understanding of the macromolecular displacement in the H-cell microchannels. It was found that particle transfer between the two channels tends to speed up at low ionic strength and high concentration gradient. This confirms the corresponding experimental observation of protein diffusion measured via the H-cell microfluidics. Show less
Benne, N.; Leboux, R.J.T.; Glandrup, M.; Duijn, J. van; Lozano, Vigario F.; Neustrup, M.A.; ... ; Slütter, B. 2019
Regulatory T cells (Tregs) are vital for maintaining a balanced immune response and their dysfunction is oftenassociated with auto-immune disorders. We have previously shown that antigen-loaded... Show moreRegulatory T cells (Tregs) are vital for maintaining a balanced immune response and their dysfunction is oftenassociated with auto-immune disorders. We have previously shown that antigen-loaded anionic liposomescomposed of phosphatidylcholine (PC) and phosphatidylglycerol (PG) and cholesterol can induce strong antigenspecificTreg responses. We hypothesized that altering the rigidity of these liposomes while maintaining theirsize and surface charge would affect their capability of inducing Treg responses. The rigidity of liposomes isaffected in part by the length and saturation of carbon chains of the phospholipids in the bilayer, and in part bythe presence of cholesterol. We used atomic force microscopy (AFM) to measure the rigidity of anionic OVA323-containing liposomes composed of different types of PC and PG, with or without cholesterol, in a molar ratio of4:1(:2) distearoyl (DS)PC:DSPG (Young's modulus (YM) 3611 ± 1271 kPa), DSPC:DSPG:CHOL(1498 ± 531 kPa), DSPC:dipalmitoyl (DP)PG:CHOL (1208 ± 538), DPPC:DPPG:CHOL (1195 ± 348 kPa),DSPC:dioleoyl (DO)PG:CHOL (825 ± 307 kPa), DOPC:DOPG:CHOL (911 ± 447 kPa), and DOPC:DOPG(494 ± 365 kPa). Next, we assessed if rigidity affects the association of liposomes to bone marrow-deriveddendritic cells (BMDCs) in vitro. Aside from DOPC:DOPG liposomes, we observed a positive correlation betweenliposomal rigidity and cellular association. Finally, we show that rigidity positively correlates with Treg responsesin vitro in murine DCs and in vivo in mice. Our findings underline the suitability of AFM to measureliposome rigidity and the importance of this parameter when designing liposomes as a vaccine delivery system. Show less
Benne, N.; Leboux, R.J.T.; Glandrup, M.; Duijn, J. van; Lozano, Vigario F.; Neustrup, M.A.; ... ; Slütter, B. 2019
Regulatory T cells (Tregs) are vital for maintaining a balanced immune response and their dysfunction is oftenassociated with auto-immune disorders. We have previously shown that antigen-loaded... Show moreRegulatory T cells (Tregs) are vital for maintaining a balanced immune response and their dysfunction is oftenassociated with auto-immune disorders. We have previously shown that antigen-loaded anionic liposomescomposed of phosphatidylcholine (PC) and phosphatidylglycerol (PG) and cholesterol can induce strong antigenspecificTreg responses. We hypothesized that altering the rigidity of these liposomes while maintaining theirsize and surface charge would affect their capability of inducing Treg responses. The rigidity of liposomes isaffected in part by the length and saturation of carbon chains of the phospholipids in the bilayer, and in part bythe presence of cholesterol. We used atomic force microscopy (AFM) to measure the rigidity of anionic OVA323-containing liposomes composed of different types of PC and PG, with or without cholesterol, in a molar ratio of4:1(:2) distearoyl (DS)PC:DSPG (Young's modulus (YM) 3611 ± 1271 kPa), DSPC:DSPG:CHOL(1498 ± 531 kPa), DSPC:dipalmitoyl (DP)PG:CHOL (1208 ± 538), DPPC:DPPG:CHOL (1195 ± 348 kPa),DSPC:dioleoyl (DO)PG:CHOL (825 ± 307 kPa), DOPC:DOPG:CHOL (911 ± 447 kPa), and DOPC:DOPG(494 ± 365 kPa). Next, we assessed if rigidity affects the association of liposomes to bone marrow-deriveddendritic cells (BMDCs) in vitro. Aside from DOPC:DOPG liposomes, we observed a positive correlation betweenliposomal rigidity and cellular association. Finally, we show that rigidity positively correlates with Treg responsesin vitro in murine DCs and in vivo in mice. Our findings underline the suitability of AFM to measureliposome rigidity and the importance of this parameter when designing liposomes as a vaccine delivery system. Show less
Benne, N.; Leboux, R.J.T.; Glandrup, M.; Duijn, J. van; Lozano, Vigario F.; Neustrup, M.A.; ... ; Slütter, B. 2019
Regulatory T cells (Tregs) are vital for maintaining a balanced immune response and their dysfunction is often associated with auto-immune disorders. We have previously shown that antigen-loaded... Show moreRegulatory T cells (Tregs) are vital for maintaining a balanced immune response and their dysfunction is often associated with auto-immune disorders. We have previously shown that antigen-loaded anionic liposomes composed of phosphatidylcholine (PC) and phosphatidylglycerol (PG) and cholesterol can induce strong antigen-specific Treg responses. We hypothesized that altering the rigidity of these liposomes while maintaining their size and surface charge would affect their capability of inducing Treg responses. The rigidity of liposomes is affected in part by the length and saturation of carbon chains of the phospholipids in the bilayer, and in part by the presence of cholesterol. We used atomic force microscopy (AFM) to measure the rigidity of anionic OVA323-containing liposomes composed of different types of PC and PG, with or without cholesterol, in a molar ratio of 4:1(:2) distearoyl (DS)PC:DSPG (Young's modulus (YM) 3611 ± 1271 kPa), DSPC:DSPG:CHOL (1498 ± 531 kPa), DSPC:dipalmitoyl (DP)PG:CHOL (1208 ± 538), DPPC:DPPG:CHOL (1195 ± 348 kPa), DSPC:dioleoyl (DO)PG:CHOL (825 ± 307 kPa), DOPC:DOPG:CHOL (911 ± 447 kPa), and DOPC:DOPG (494 ± 365 kPa). Next, we assessed if rigidity affects the association of liposomes to bone marrow-derived dendritic cells (BMDCs) in vitro. Aside from DOPC:DOPG liposomes, we observed a positive correlation between liposomal rigidity and cellular association. Finally, we show that rigidity positively correlates with Treg responses in vitro in murine DCs and in vivo in mice. Our findings underline the suitability of AFM to measure liposome rigidity and the importance of this parameter when designing liposomes as a vaccine delivery system. Show less
Heuts, J.; Varypataki, E.M.; Maaden, K. van der; Romeijn, S.; Drijfhout, J.W.; Scheltinga, A.T. van; ... ; Jiskoot, W. 2018
A key enabling step in leveraging the properties of nanoparticles (NPs) is to explore new, simple, controllable, and scalable nanotechnologies for their syntheses. Among “wet” methods, cathodic... Show moreA key enabling step in leveraging the properties of nanoparticles (NPs) is to explore new, simple, controllable, and scalable nanotechnologies for their syntheses. Among “wet” methods, cathodic corrosion has been used to synthesize catalytic aggregates with some control over their size and preferential faceting. Here, we report on a modification of the cathodic corrosion method for producing a range of nonaggregated nanocrystals (Pt, Pd, Au, Ag, Cu, Rh, Ir, and Ni) and nanoalloys (Pt50Au50, Pd50Au50, and AgxAu100–x) with potential for scaling up the production rate. The method employs poly(vinylpyrrolidone) (PVP) as a stabilizer in an electrolyte solution containing nonreducible cations (Na+, Ca2+), and cathodic corrosion of the corresponding wires takes place in the electrolyte under ultrasonication. The ultrasonication not only promotes particle–PVP interactions (enhancing NP dispersion and diluting locally high NP concentration) but also increases the production rate by a factor of ca. 5. Further increase in the production rate can be achieved through parallelization of electrodes to construct comb electrodes. With respect to applications, carbon-supported Pt NPs prepared by the new method exhibit catalytic activity and durability for methanol oxidation comparable or better than the commercial benchmark catalyst. A variety of AgxAu100–x nanoalloys are characterized by ultraviolet–visible absorption spectroscopy and high-resolution transmission electron microscopy. The protocol for NP synthesis by cathodic corrosion should be a step toward its further use in academic research as well as in its practical upscaling. Show less
Schipper, P.; Maaden, K. van der; Romeijn, S.; Oomens, C.; Kersten, G.; Jiskoot, W.; Bouwstra, J. 2016
The purpose of this study was to investigate the effect of various repeated fractional intradermal dosing schedules of inactivated polio vaccine serotype 1 (IPV1) on IPV1-specific IgG responses in... Show moreThe purpose of this study was to investigate the effect of various repeated fractional intradermal dosing schedules of inactivated polio vaccine serotype 1 (IPV1) on IPV1-specific IgG responses in rats. By utilizing an applicator that allowed for precisely controlled intradermal microinjections by using a single hollow microneedle, rats were immunized intradermally with 5 D-antigen units (DU) of IPV1 at 150μm skin depth. This dose was administered as a bolus, or in a repeated fractional dosing schedule: 4 doses of 1.25 DU (1/4th of total dose) were administered on four consecutive days or every other day; 8 doses of 0.625 DU (1/8th of total dose) were administered on eight consecutive days; or 4 exponentially increasing doses (0.04, 0.16, 0.8 and 4 DU), either with or without an exponentially increasing CpG oligodeoxynucleotide 1826 (CpG) dose, were administered on four consecutive days. All of these fractional dosing schedules resulted in up to ca. 10-fold higher IPV1-specific IgG responses than intradermal and intramuscular bolus dosing. IPV1 combined with adjuvant CpG in exponential dosing did not significantly increase the IPV1-specific IgG responses further, which demonstrated that maximal responses were achieved by fractional dosing. In conclusion, repeated fractional intradermal IPV1 dosing leads to superior IPV1-specific IgG responses without the use of adjuvants. These results indicate that a controlled release delivery system for intradermal IPV1 delivery can potentiate IPV1-specific IgG responses. Show less
Dissolving microneedles are an attractive approach for non-invasive delivery of drugs via the skin, particularly when the doses are in the microgram or low-milligram range. The aim of the study was... Show moreDissolving microneedles are an attractive approach for non-invasive delivery of drugs via the skin, particularly when the doses are in the microgram or low-milligram range. The aim of the study was to develop hyaluronan-based, monoclonal IgG-loaded microneedles for intradermal delivery enabling efficient penetration and rapid dissolution in the skin while preserving protein stability. Microscopic analysis showed successful preparation of sharp microneedles with the tip length of ~ 280 μm and with up to 10% (w/w) of IgG content. The water content of the microneedles was ~ 12% and was not affected by the protein content. The protein distribution was uniform within microneedle tips and individual arrays but some array-to-array variation of IgG level within a single preparation batch was detected. After dissolution of microneedle arrays in PBS, > 80% of protein was recovered and no conformational changes were detected by fluorescence spectroscopy. At submicron level, only weak and reversible interaction between HA and IgG was found by asymmetric flow field flow fractionation analysis after the dissolution of prepared microneedles. Although, the formation of insoluble micron-size particles was detected by flow imaging microscopy the IgG amount incorporated into these particles was negligible (< 5%). Finally, microneedles were able to penetrate into the epidermis of ex vivo human skin followed by the rapid dissolution of the microneedle tips in the skin. After 10 min of application, the majority of the original tip length was dissolved and IgG and hyaluronan were co-deposited until a depth of 150–200 μm in the skin. In conclusion, developed hyaluronan-based dissolving microneedles allow rapid non-invasive intradermal protein delivery. Show less
Maaden, K. van der; Varypataki, E.M.; Romeijn, S.; Ossendorp, F.; Jiskoot, W.; Bouwstra, J. 2014
