The energy transition will require a rapid deployment of renewable energy (RE) and electric vehicles (EVs) where other transit modes are unavailable. EV batteries could complement RE generation by... Show moreThe energy transition will require a rapid deployment of renewable energy (RE) and electric vehicles (EVs) where other transit modes are unavailable. EV batteries could complement RE generation by providing short-term grid services. However, estimating the market opportunity requires an understanding of many socio-technical parameters and constraints. We quantify the global EV battery capacity available for grid storage using an integrated model incorporating future EV battery deployment, battery degradation, and market participation. We include both in-use and end-of-vehicle-life use phases and find a technical capacity of 32–62 terawatt-hours by 2050. Low participation rates of 12%–43% are needed to provide short-term grid storage demand globally. Participation rates fall below 10% if half of EV batteries at end-of-vehicle-life are used as stationary storage. Short-term grid storage demand could be met as early as 2030 across most regions. Our estimates are generally conservative and offer a lower bound of future opportunities. Show less
Tukker, A.; Behrens, P.; Deetman, S.P.; Hu, M.; Migoni Alejandre, E.; Meide, M. van der; ... ; Zhang, C. 2023
The building sector plays a key role in energy transition and carbon reduction while capturing the dynamic characteristics (e.g. materials, energy performance, and environmental impact) of building... Show moreThe building sector plays a key role in energy transition and carbon reduction while capturing the dynamic characteristics (e.g. materials, energy performance, and environmental impact) of building stock is a great challenge during the gradual process. This study presents a bottom-up dynamic building stock model that links dynamic material flow analysis with building energy modeling. The environmental impact of material and energy requirements is assessed by considering future electricity mix. The model is applied to evaluate the pathways to the climate-neutral energy supply of residential building stock in the Netherlands by 2050. Results show that space heating demand decreases by about 2/3 by 2050, while the energy for hot water increases to 92% of space heating demand. 80% of public grid electricity for appliances and lighting can be potentially substituted if rooftop photovoltaic (PV) systems are installed on 50% of renovated buildings and all the new buildings. Greenhouse gas (GHG) emissions of operational energy are reduced by approximately 60-90%, depending on the electricity mix. Annual GHG emissions from material production are not as important as those related to operational energy. Insulation materials account for a large proportion of the carbon footprint of material production. The model has a high spatial and temporal resolution and can be linked with local energy source availability (e.g. buildings or neighborhoods) to provide more accurate support for policymaking. Show less
Zhang, C.; Hu, M.; Di Maio, F.; Sprecher, B.; Yang, X.; Tukker, A. 2022
The construction sector is the biggest driver of resource consumption and waste generation in Europe. The European Union (EU) is making efforts to move from its traditional linear resource and... Show moreThe construction sector is the biggest driver of resource consumption and waste generation in Europe. The European Union (EU) is making efforts to move from its traditional linear resource and waste management system in the construction sector to a level of high circularity. Based on the theory of circular economy, a new paradigm called waste hierarchy was introduced in the EU Waste Framework Directive. This work uses the framework of the waste hierarchy to analyze the practice of construction and demolition waste (CDW) management in Europe. We explore the evolution of the waste hierarchy in Europe and how it compares with the circular economy. Then, based on the framework, we analyze the performance of CDW management in each EU member state. Innovative treatment methods of CDW, focusing on waste concrete, is investigated. This brings insight into optimizing and upgrading the CDW management in light of advanced technologies and steering the pathway for transitioning the EU towards a circular society. Show less
Building stock growth around the world drives extensive material consumption and environmental impacts. Future impacts will be dependent on the level and rate of socioeconomic development, along... Show moreBuilding stock growth around the world drives extensive material consumption and environmental impacts. Future impacts will be dependent on the level and rate of socioeconomic development, along with material use and supply strategies. Here we evaluate material-related greenhouse gas (GHG) emissions for residential and commercial buildings along with their reduction potentials in 26 global regions by 2060. For a middle-of-the-road baseline scenario, building material-related emissions see an increase of 3.5 to 4.6 Gt CO2eq yr-1 between 2020-2060. Low- and lower-middle-income regions see rapid emission increase from 750 Mt (22% globally) in 2020 and 2.4 Gt (51%) in 2060, while higher-income regions shrink in both absolute and relative terms. Implementing several material efficiency strategies together in a High Efficiency (HE) scenario could almost half the baseline emissions. Yet, even in this scenario, the building material sector would require double its current proportional share of emissions to meet a 1.5 degrees C-compatible target.Building construction causes large material-related emissions which present a serious decarbonization challenge. Here, the authors show that the building material sector could halve emissions by increasing efficiency until 2060 but even then its emissions would be twice as high as needed to meet the 1.5 degrees C target. Show less
Zhong, X.; Hu, M.; Deetman, S.P.; Dias Rodrigues, J.F.; Lin, H.; Tukker, A.; Behrens, P.A. 2021
Energy efficiency plays an essential role in energy conservation and emissions mitigation efforts in the building sector. This is especially important considering that the global building stock is... Show moreEnergy efficiency plays an essential role in energy conservation and emissions mitigation efforts in the building sector. This is especially important considering that the global building stock is expected to rapidly expand in the years to come. In this study, a global-scale modeling framework is developed to analyze the evolution of building energy intensity per floor area during 1971-2014, its relationship with economic development, and its future role in energy savings across 21 world regions by 2060. Results show that, for residential buildings, while most high-income and upper-middle-income regions see decreasing energy intensities and strong decoupling from economic development, the potential for further efficiency improvement is limited in the absence of significant socioeconomic and technological shifts. Lower-middle-income regions, often overlooked in analyses, will see large potential future residential energy savings from energy intensity reductions. Harnessing this potential will include, among other policies, stricter building efficiency standards in new construction. For the commercial sector, during 1971-2014, the energy intensity was reduced by 50% in high-income regions but increased by 193% and 44% in upper-middle and lower-middle-income regions, respectively. Given the large energy intensity reduction potential and rapid floor area growth, commercial buildings are increasingly important for energy saving in the future. (C) 2021 The Author(s). Published by Elsevier Ltd. Show less
Zhang, C.; Hu, M.; Laclau, B.; Garnesson, T.; Yang, X.; Tukker, A. 2021
Buildings have become a major concern because of their high energy use and carbon emissions. Thus, a material-efficient prefabricated concrete element (PCE) system was developed to incorporate... Show moreBuildings have become a major concern because of their high energy use and carbon emissions. Thus, a material-efficient prefabricated concrete element (PCE) system was developed to incorporate construction and demolition waste as feedstock for residential building energy renovation by over-cladding the walls of old buildings. By conducting life cycle assessment and life cycle costing using the payback approach, this study aims to explore the life cycle performance of energy conservation, carbon mitigation, and cost reduction of the PCE system in three European member states: Spain, the Netherlands, and Sweden. The results show that the energy payback periods for Spain, the Netherlands, and Sweden were 20.45 years, 17.60 years, 19.95 years, respectively, and the carbon payback periods were 23.33 years, 16.78 years, and 8.58 years, respectively. However, the financial payback periods were less likely to be achieved within the building lifetime, revealing that only the Swedish case achieved a payback period within 100 years (83.59 years). Thus, circularity solutions were considered to shorten the PCE payback periods. Using secondary materials in PCE fabrication only slightly reduced the payback period. However, reusing the PCE considerably reduced the energy and carbon payback periods to less than 6 years and 11 years, respectively in all three cases. Regarding cost, reusing the PCE shortened the Swedish payback period to 29.30 years, while the Dutch and Spanish cases achieved investment payback at 42.97 years and 85.68 years, respectively. The results can be extrapolated to support the design of sustainable building elements for energy renovation in Europe. Show less
Zhang, C.; Hu, M.; Sprecher, B.; Yang, X.; Zhong, X.; Li, C.; Tukker, A. 2021
AbstractThe world is shifting to electric vehicles to mitigate climate change. Here, we quantify the future demand for key battery materials, considering potential electric vehicle fleet and... Show moreAbstractThe world is shifting to electric vehicles to mitigate climate change. Here, we quantify the future demand for key battery materials, considering potential electric vehicle fleet and battery chemistry developments as well as second-use and recycling of electric vehicle batteries. We find that in a lithium nickel cobalt manganese oxide dominated battery scenario, demand is estimated to increase by factors of 18–20 for lithium, 17–19 for cobalt, 28–31 for nickel, and 15–20 for most other materials from 2020 to 2050, requiring a drastic expansion of lithium, cobalt, and nickel supply chains and likely additional resource discovery. However, uncertainties are large. Key factors are the development of the electric vehicles fleet and battery capacity requirements per vehicle. If other battery chemistries were used at large scale, e.g. lithium iron phosphate or novel lithium-sulphur or lithium-air batteries, the demand for cobalt and nickel would be substantially smaller. Closed-loop recycling plays a minor, but increasingly important role for reducing primary material demand until 2050, however, advances in recycling are necessary to economically recover battery-grade materials from end-of-life batteries. Second-use of electric vehicles batteries further delays recycling potentials. Show less
Zhang, C.; Hu, M.; Laclau, B.; Garnesson, T.; Yang, X.; Li, C.; Tukker, A. 2020
Around 35% of the buildings in Europe are over 50 years old and almost 75% of the building stock is energy-inefficient. A European project VEEP is developing an innovative prefabricated concrete... Show moreAround 35% of the buildings in Europe are over 50 years old and almost 75% of the building stock is energy-inefficient. A European project VEEP is developing an innovative prefabricated concrete element (PCE) system to improve the thermal performance of new buildings (PCE1) and old buildings (PCE2). This study focused on retrofitting of old buildings via over-cladding of the building envelope with PCE2. This study aims to from a building owner/consumer’s perspective to explore the life cycle economic performance of the PCE2 system at an early stage and associated cost optimization strategies under the European context. This study tries to answer four questions: 1) whether the use of the PCE2 leads to an economic advantage over a specific life cycle of an existing building. 2) what is the biggest cost stressor in the life cycle of a PCE2? 3) the potential route for further cost optimization. and 4) how would the discount rate affect the life cycle costs, especially when Europe has entered a negative rate age? A typical apartment building in the Netherlands is selected as the case study for dynamic thermal simulation, in which the heating and cooling energy demands before and after refurbishment with PCE2 will be evaluated. By employing environmental life cycle costing (LCC), the life cycle costs over 40 years and associated strategy for cost optimization will be investigated. This research not only unveils meaningful financial implications on resource-efficient building energy retrofitting in Europe but also provides insight on methodological dilemmas within the application of LCC. Show less
Zhang, C.; Hu, M.; Yang, X.; Miranda Xicotencatl, B.; Sprecher, B.; Di Maio, F.; ... ; Tukker, A. 2020
Urban mining from construction and demolition waste (CDW) is highly relevant for the circular economy ambitions of the European Union (EU). Given the large volumes involved, end-of-life (EoL)... Show moreUrban mining from construction and demolition waste (CDW) is highly relevant for the circular economy ambitions of the European Union (EU). Given the large volumes involved, end-of-life (EoL) concrete is identified as one of the priority streams for CDW recycling in most EU countries, but it is currently largely downcycled or even landfilled. The European projects C2CA and VEEP have proposed several cost-effective technologies to recover EoL concrete for new concrete manufacturing. To understand the potential effects of large-scale implementation of those recycling technologies on the circular construction, this study deployed static material flow analysis (MFA) for a set of EoL concrete management scenarios in the Netherlands constructed by considering the development factors in two, technological and temporal dimensions. On the technological dimension, three treatment systems for EoL concrete management, namely: business-as-usual treatment, C2CA technological system and VEEP technological system were investigated. On the temporal dimension, 2015 was selected as the reference year, representing the current situation, and 2025 as the future year for the prospective analysis. The results show that the development of cost-effective technologies has the potential to improve the share of recycling (as opposed to downcycling) in the Netherlands from around 5% in 2015 up to 22%~32% in 2025. From the academic aspect, the presented work illustrates how the temporal dimension can be included in the static MFA study to explore the potential effects in the future. Show less
Zhang, C.; Hu, M.; Yang, X.; Amati, A.; Tukker, A. 2020
The emissions of the Chinese industrial sector alone comprise 24.1% of global emissions (7.8 GtCyr−1 in 2015). This makes Chinese industrial emissions of unique national and international relevance... Show moreThe emissions of the Chinese industrial sector alone comprise 24.1% of global emissions (7.8 GtCyr−1 in 2015). This makes Chinese industrial emissions of unique national and international relevance in climate policy. This study reports a literature survey that quantitatively describes the evolution of these emissions from 2000 to 2050 in the context of policy goals. The survey reveals that: (1) The major historical factor contributing to the decrease in industrial CO2 emissions has been the reduction in energy intensities. However, that decrease has been more than compensated for by increases in industrial activity. (2) An ensemble of projections shows that China's industrial emissions will likely peak in 2030, in alignment with China's commitment to the Paris Agreement. The timing of the peak varies across industrial sub-sectors, with ferrous metals and non-metallic products sectors peaking first, and the electricity sector later. (3) The assumptions underlying optimistic scenarios broadly match the drivers of recent decreases in historical emissions (energy intensity, industrial structure and energy mix). Furthermore, these factors feature prominently in China's policy portfolio to both develop and decarbonize the Chinese industrial sector. The industrial carbon intensity targets of 2020 and 2025 are close to the median predictions in the medium scenarios from studies. Show less
Zhang, C.; Hu, M.; Dong, L.; Gebremariam, A.; Xicotencatl, B.M.; Di Maio, F.; Tukker, A. 2019
The increasing volume of Construction and demolition waste (CDW) associated with economic growth is posing challenges to the sustainable management of the built environment. The largest fraction of... Show moreThe increasing volume of Construction and demolition waste (CDW) associated with economic growth is posing challenges to the sustainable management of the built environment. The largest fraction of all the CDW generated in the member states of the European Union (EU) is End-of-life (EOL) concrete. The most widely applied method for EOL concrete recovery in Europe is road base backfilling, which is considered low-grade recovery. The common practice for high-grade recycling is wet process that processes and washes EOL concrete into clean coarse aggregate for concrete manufacturing. It is costly. As a result, a series of EU projects have been launched to advance the technologies for high value-added concrete recycling. A critical environmental and economic evaluation of such technological innovations is important to inform decision making, while there has been a lack of studies in this field. Hence the present study aimed to assess the efficiency of the technical innovations in high-grade concrete recycling, using an improved eco-efficiency analytical approach by integrating life cycle assessment (LCA) and life cycle costing (LCC). Four systems of high-grade concrete recycling were analyzed for comparison: (i) business-as-usual (BAU) stationary wet processing; (ii) stationary advanced dry recovery (ADR); (iii) mobile ADR; (iv) mobile ADR and Heating Air Classification (A&H). An overarching framework was proposed for LCA/LCC-type eco-efficiency assessment conforming to ISO standards. The study found that technological routes that recycle on-site and produce high-value secondary products are most advantageous. Accordingly, policy recommendations are proposed to support the technological innovations of CDW management. Show less
Wang, J.; Hu, M.; Tukker, A.; Dias Rodrigues, J.F. 2019
In order to respond to climate change, China has committed to reduce national carbon intensity by 40–45% in 2020 and 60–65% in 2030, relative to 2005. Given that energy-intensive industries... Show moreIn order to respond to climate change, China has committed to reduce national carbon intensity by 40–45% in 2020 and 60–65% in 2030, relative to 2005. Given that energy-intensive industries represent ~80% of total CO2 emissions in China and that China is a large and diverse country, this paper aims to investigate the potential contribution of regional convergence in energy-intensive industries to CO2 emissions reduction and to meeting China's emissions goals. To the best of our knowledge this matter has never been explored before. Using panel data from 2001 to 2015, we build three scenarios of future carbon intensities: business as usual (BAU), frontier (based on the directional distance function, in which all regions reach the efficiency frontier) and best available technology (BAT, in which all regions adopt the lowest-emitting technology). The frontier and BAT scenarios represent a weak and a strong form of regional convergence, respectively, and the BAU assumes that it develops following historical patterns. We then use the Kaya identity to estimate CO2 emissions up to 2030 under the three scenarios. Our results are as follows: (1) Under BAU, the CO2 emissions of energy-intensive industries increase from 7382.8 Mt in 2015 to 8127.6 Mt in 2030. Under the frontier scenario the emissions in 2030 are 44.23% lower than under business as usual, while under the BAT scenario this value becomes 84.81%. Electricity and ferrous metals are the sectors that most contribute to the reduction potential. (2) Even under BAU the carbon intensity of energy-intensive industries as a whole and all of its constituent sub-sectors except for electricity will decrease by more than the nationally-mandated averages. (3) Regional convergence could help the energy-intensive industries peak its CO2 emissions before 2030, while under BAU the absolute emissions of the energy-intensive industries keep increasing. Show less
