AimsThe primary objective of this study was to compare the five-year tibial component migration and wear between highly crosslinked polyethylene (HXLPE) inserts and conventional polyethylene (PE)... Show moreAimsThe primary objective of this study was to compare the five-year tibial component migration and wear between highly crosslinked polyethylene (HXLPE) inserts and conventional polyethylene (PE) inserts of the uncemented Triathlon fixed insert cruciate-retaining total knee arthroplasty (TKA). Secondary objectives included clinical outcomes and patient-reported outcome measures (PROMs).MethodsA double-blinded, randomized study was conducted including 96 TKAs. Tibial component migration and insert wear were measured with radiostereometric analysis (RSA) at three, six, 12, 24, and 60 months postoperatively. PROMS were collected preoperatively and at all follow-up timepoints.ResultsThere was no clinically relevant difference in terms of tibial component migration, insert wear, and PROMs between the HXLPE and PE groups. The mean difference in tibial component migration (maximal total point migration (MTPM)) was 0.02 mm (95% confidence interval (CI) -0.07 to 0.11), which is below the value of 0.2 mm considered to be clinically relevant. Wear after five years for HXLPE was 0.16 mm (95% CI 0.05 to 0.27), and for PE was 0.23 mm (95% CI 0.12 to 0.35). The mean difference in wear rate was 0.01 mm/year (95% CI -0.02 to 0.05) in favour of the HXLPE group. Wear is mainly present on the medial side of the insert.ConclusionThere is no clinically relevant difference in tibial component migration and insert wear for up to five years between the HXLPE conventional PE inserts. For the implant studied, the potential advantages of a HXLPE insert remain to be proven under clinical conditions at longer-term follow-up. Show less
Aims: Arthroplasty surgery of the knee and hip is performed in two to three million patients an-nually. Periprosthetic joint infections occur in 4% of these patients. Debridement, antibiot-ics, and... Show moreAims: Arthroplasty surgery of the knee and hip is performed in two to three million patients an-nually. Periprosthetic joint infections occur in 4% of these patients. Debridement, antibiot-ics, and implant retention (DAIR) surgery aimed at cleaning the infected prosthesis often fails, subsequently requiring invasive revision of the complete prosthetic reconstruction. Infection-specific imaging may help to guide DAIR. In this study, we evaluated a bacteria -specific hybrid tracer (99mTc-UBI29-41-Cy5) and its ability to visualize the bacterial load on fem-oral implants using clinical -grade image guidance methods. Methods: 99mTc-UBI29-41- Cy5 specificity for Stapylococcus aureus was assessed in vitro using fluorescence confocal imaging. Topical administration was used to highlight the location of S. aureus cul-tured on femoral prostheses using fluorescence imaging and freehand single photon emis-sion CT (fhSPECT) scans. Gamma counting and fhSPECT were used to quantify the bacterial load and monitor cleaning with chlorhexidine. Microbiological culturing helped to relate the imaging findings with the number of (remaining) bacteria. Results: Bacteria could be effectively stained in vitro and on prostheses, irrespective of the presence of biofilm. Infected prostheses revealed bacterial presence on the transition zone between the head and neck, and in the screw hole. Qualitative 2D fluorescence images could be com-plemented with quantitative 3D fhSPECT scans. Despite thorough chlorhexidine treatments, 28% to 44% of the signal remained present in the locations of the infection that were iden-tified using imaging, which included 500 to 2,000 viable bacteria.Conclusion: The hybrid tracer99mTc-UBI29-41-Cy5 allowed effective bacterial staining. Qualitative real -time fluorescence guidance could be effectively combined with nuclear imaging that enables quantitative monitoring of the effectiveness of cleaning strategies. Show less
Background and purpose - Assessing peri-acetabular bone quality is valuable for optimizing the outcomes of pri- mary total hip arthroplasty (THA) as preservation of good quality bone stock likely... Show moreBackground and purpose - Assessing peri-acetabular bone quality is valuable for optimizing the outcomes of pri- mary total hip arthroplasty (THA) as preservation of good quality bone stock likely affects implant stability. The aim of this study was to perform a meta-analysis of peri-acetabular bone mineral density (BMD) changes over time measured using quantitative computer tomography (CT) and, second, to investigate the influence of age, sex, and fixation on the change in BMD over time.Methods - A systematic search of Embase, Scopus, Web of Science, and PubMed databases identified 19 studies that measured BMD using CT following THA. The regions of interest (ROI), reporting of BMD results, and scan protocols were extracted. A meta-analysis of BMD was performed on 12 studies that reported measurements immediately postop- eratively and at follow-up.Results - The meta-analysis determined that peri- acetabular BMD around both cemented and uncemented components decreases over time. The amount of BMD loss increased relative to proximity of the acetabular component. There was a greater decrease in cortical BMD over time in females and cancellous BMD for young patients of any sex.Conclusion - Peri-acetabular BMD decreases at differ- ent rates relative to its proximity to the acetabular component. Cancellous BMD decreases more in young patients and cor- tical bone decreases more in females. Standardized reporting parameters and suggested ROI to measure peri-acetabular BMD are proposed, to enable comparison between implant and patient variables in the future. Show less
Aims Arthroplasty surgery of the knee and hip is performed in two to three million patients an-nually. Periprosthetic joint infections occur in 4% of these patients. Debridement, antibiot-ics, and... Show moreAims Arthroplasty surgery of the knee and hip is performed in two to three million patients an-nually. Periprosthetic joint infections occur in 4% of these patients. Debridement, antibiot-ics, and implant retention (DAIR) surgery aimed at cleaning the infected prosthesis often fails, subsequently requiring invasive revision of the complete prosthetic reconstruction. Infection-specific imaging may help to guide DAIR. In this study, we evaluated a bacteria -specific hybrid tracer (99mTc-UBI29-41-Cy5) and its ability to visualize the bacterial load on fem-oral implants using clinical -grade image guidance methods.Methods 99mTc-UBI29-41- Cy5 specificity for Stapylococcus aureus was assessed in vitro using fluorescence confocal imaging. Topical administration was used to highlight the location of S. aureus cul-tured on femoral prostheses using fluorescence imaging and freehand single photon emis-sion CT (fhSPECT) scans. Gamma counting and fhSPECT were used to quantify the bacterial load and monitor cleaning with chlorhexidine. Microbiological culturing helped to relate the imaging findings with the number of (remaining) bacteria.Results Bacteria could be effectively stained in vitro and on prostheses, irrespective of the presence of biofilm. Infected prostheses revealed bacterial presence on the transition zone between the head and neck, and in the screw hole. Qualitative 2D fluorescence images could be com-plemented with quantitative 3D fhSPECT scans. Despite thorough chlorhexidine treatments, 28% to 44% of the signal remained present in the locations of the infection that were iden-tified using imaging, which included 500 to 2,000 viable bacteria.Conclusion The hybrid tracer99mTc-UBI29-41-Cy5 allowed effective bacterial staining. Qualitative real -time fluorescence guidance could be effectively combined with nuclear imaging that enables quantitative monitoring of the effectiveness of cleaning strategies. Show less
Aims: Here we used a mature seven -day biofilm model of Staphylococcus aureus, exposed to antibiotics up to an additional seven days, to establish the effectiveness of either mechanical cleaning or... Show moreAims: Here we used a mature seven -day biofilm model of Staphylococcus aureus, exposed to antibiotics up to an additional seven days, to establish the effectiveness of either mechanical cleaning or antibiotics or non-contact induction heating, and which combinations could eradicate S. aureus in mature biofilms. Methods: Mature biofilms of S. aureus (ATCC 29213) were grown on titanium alloy (Ti6Al4V) coupons for seven days and were subjected to the following treatments or their combinations: antibiotics, mechanical cleaning, or heat shock by induction heating of 60 & DEG;C for one minute. Experiments were repeated at least five times. Results: In the untreated biofilm, growth up to 1.8x1011 colony-forming units (CFU)/cm2 was observed. Treatment with ciprofloxacin, flucloxacillin, vancomycin, cefuroxime, and amoxicillin all with rifampicin gave 6.0 log, 6.1 log, 1.4 log, 4.8 log, and 3.6 log reduction in CFU/cm2, respectively. Mechanical cleaning alone resulted in 4.9 log reduction and induc-tion heating in 7.3 log reduction. There was an additional effect of ciprofloxacin, fluclox-acillin, and induction heating when used in combinations. There was no additional effect for mechanical cleaning. No bacterial growth could be detected after induction heating followed by seven days of ciprofloxacin with rifampicin. Conclusion: Mechanical cleaning, antibiotics, and non-contact induction heating reduced the bacterial load of mature S. aureus biofilms with approximately 5 log or more as a single treatment. The effect of mechanical cleaning on mature S. aureus biofilms was limited when used in combination with antibiotics and/or induction heating. Show less
Importance: Aseptic loosening is a major cause of failure for unicondylar knee arthroplasty (UKA). In total knee arthroplasty (TKA), early migration as measured with radiostereometric analysis (RSA... Show moreImportance: Aseptic loosening is a major cause of failure for unicondylar knee arthroplasty (UKA). In total knee arthroplasty (TKA), early migration as measured with radiostereometric analysis (RSA) is a strong predictor of late revision for aseptic loosening of the tibial component. Migration in the first two years provides information on the fixation of an implant. However, the migration pattern of UKAs has not been systematically determined, and it is unclear if the migration pattern of UKAs is similar to that of TKAs. Therefore, the present meta-analysis aims to evaluate the migration patterns of tibial components of UKAs. Evidence review: All RSA studies reporting on migration at two or more postoperative time-points following UKA were included. Pubmed, Web of Science, Cochrane, and Embase were searched up to April 2021. The risk of bias was assessed using the methodological score of the Assessment of Quality in Lower Limb Arthroplasty tool. All phases of the review were performed by two reviewers independently. A random-effects model was applied to pool the migration data. Findings: The literature search yielded 3,187 hits, of which ten studies were included, comprising 13 study groups and 381 UKAs. The majority of the early migration occurred in the first 6 months postoperatively followed by a period of very little migration, similar to what is reported for TKAs. The pooled mean migration expressed as the maximum total point motion of all UKAs at 3 months, 6 months, 1 year, and 2 years was 0.43 mm (95% CI 0.38???0.48), 0.54 mm (95% CI 0.40???0.67), 0.59 mm (95% CI 0.52???0.66), and 0.61 mm (95% CI 0.55???0.68), respectively. Migration at one year and two years was higher than migration of TKAs as reported in previous studies. All-polyethylene UKAs migrated more at one year (0.69 mm; 95% CI 0.58???0.80) than metal-backed UKAs (0.52 mm; 95% CI 0.46???0.58). Conclusions and relevance: The migration pattern of UKAs is comparable with that of TKAs in the first two years as both types of implants show initial migration in the first few months and very little migration thereafter. However, UKAs had higher migration at 1-year and 2-year follow-up. Show less
Background The number of revisions after TKA is expected to rise because of aging populations in many countries and because patients are undergoing TKA at younger ages. Aseptic loosening is a major... Show moreBackground The number of revisions after TKA is expected to rise because of aging populations in many countries and because patients are undergoing TKA at younger ages. Aseptic loosening is a major reason for late revision, which can be predicted by radiostereometric analysis (RSA) of small groups of patients at 2 years of follow-up. RSA is therefore an ideal tool to assess new TKA designs before they are introduced to the market, although not every TKA design has been studied with RSA. If RSA-tested TKA designs have lower 10-year revision rates in national registries than non-RSA-tested TKA designs, RSA testing of all new designs could be advocated. Questions/purposes In this study, we asked: Is there a difference in the all-cause revision rate between non-RSA-tested and RSA-tested TKA designs registered in national knee arthroplasty registries at 5 and 10 years of follow-up? Methods Knee arthroplasty registries were identified through the European Federation of National Associations of Orthopaedics and Traumatology webpage and through a manual internet search. Inclusion criteria were a minimum follow-up duration of 10 years and available revision or survival data per TKA design. Twenty-six registries were identified; seven were included comprising 339 TKA designs, of which 236 designs were classified as RSA-tested and 103 as non-RSA-tested. Six registries were excluded because no report was published. One registry was excluded because no fixation method was mentioned (79 TKA designs). Another registry was excluded because there was no 10-year data available (22 non-RSA-tested designs; 10 RSA-tested designs). Eleven registries were excluded because they did not provide revision rates per design and had not reached 10 years follow-up. The revision rates with their standard errors were extracted per design. We used the data from a recent meta-analysis to identify whether a TKA design was previously tested with RSA. This meta-analysis found 53 RSA studies comprising 70 different TKA designs. The prosthesis model, fixation method and insert type were extracted from these RSA-studies. The design characteristics of the TKA reported in the knee arthroplasty registries were also extracted, and if possible, matched to the TKA designs reported in the RSA-studies. At 5 years of follow-up, 191 TKA designs were identified as non-RSA-tested and 92 were identified as RSA-tested. At 10 years of follow-up, 154 TKA designs and 74 TKA designs were classified as non-RSA-tested and RSA-tested, respectively. A random-effects model using the Metafor Package in R statistics was used to estimate the pooled revision rate at 5 and 10 years of follow-up for both groups. The difference in revision rates between groups at 5 and 10 years of follow-up was estimated by including RSA as a factor in the random-effects model. Results Mean all-cause revision rates at 5 years for non-RSA-tested and RSA-tested implants were 3.6% (95% CI 3.4 to 3.8) and 2.9% (95% CI 2.7 to 3.0), with a mean difference of 0.6% favoring RSA-tested implants (95% CI 0.4 to 0.8; p < 0.001). Mean all-cause revision rates at 10 years for non-RSA-tested and RSA-tested implants were 5.5% (95% CI 5.2 to 5.9) and 4.4% (95% CI 4.1 to 4.7), with a mean difference of 0.9% favoring RSA-tested implants (95% CI 0.4 to 1.3; p < 0.001). Conclusions Although there are exceptions, across registries, TKA designs that have been tested in an RSA setting have a slightly lower (about 1%) mean all-cause revision rate at 5-year and 10-year follow-up than those tested in a non-RSA setting.Acknowledging the inherent limitations of this observational study, a risk difference of 1% could potentially translate into an approximate 20% decrease in revision burden up to 10 years, which may have a profound impact on patient morbidity and health-related costs. Show less
AimsInduction heating is a noninvasive, nonantibiotic treatment modality that can potentially be used to cause thermal damage to the bacterial biofilm on the metal implant surface. The purpose of... Show moreAimsInduction heating is a noninvasive, nonantibiotic treatment modality that can potentially be used to cause thermal damage to the bacterial biofilm on the metal implant surface. The purpose of this study was to determine the effectiveness of induction heating on killing Staphylococcus epidermidis from biofilm and to determine the possible synergistic effect of induction heating and antibiotics.MethodsS. epidermidis biofilms were grown on titanium alloy (Ti6Al4V) coupons for 24 hours (young biofilm) and seven days (mature biofilm). These coupons with biofilm were heated to temperatures of 50 degrees C, 55 degrees C, 60 degrees C, 65 degrees C, 70 degrees C, 80 degrees C, and 90 degrees C for 3.5 minutes and subsequently exposed to vancomycin and rifampicin at clinically relevant concentrations.ResultsFor the young biofilm, total eradication was observed at 65 degrees C or higher for 3.5 minutes followed by 24 hours of vancomycin 10 mg/l and rifampicin 1 mg/l. For the mature biofilm, total eradication was observed at 60 degrees C for 3.5 minutes followed by 24 hours of vancomycin 10 mg/l and rifampicin 1 mg/l. Total eradication was also observed at 60 degrees C for 3.5 minutes followed by 24 hours of vancomycin 1 mg/l and rifampicin 1 mg/l followed by anotherthermal shock of 60 degrees C for 3.5 minutes (two thermal shocks).ConclusionInduction heating of Ti6Al4V coupons is effective in reducing bacterial load in vitro for S. epidermidis biofilms. Induction heating and antibiotics have a synergistic effect resulting in total eradication of the biofilm at 60 degrees C or higher for clinically relevant concentrations of vancomycin and rifampicin. Show less
Background: Non-contact induction heating (NCIH) is a noninvasive treatment modality that can be used to cause thermal damage to bacterial biofilms on a metal implant surface in the context of a... Show moreBackground: Non-contact induction heating (NCIH) is a noninvasive treatment modality that can be used to cause thermal damage to bacterial biofilms on a metal implant surface in the context of a prosthetic joint infection. The purpose of this study was (1) to determine the effectiveness of NCIH on killing Staphylococcus aureus from biofilm and (2) to determine the possible synergistic effect of NCIH and cocktails of antibiotics and N-acetylcysteine (NAC). Methods: Staphylococcus aureus biofilms were grown on titanium alloy (Ti6Al4V) coupons. These coupons were heated to 50 degrees C, 60 degrees C, 70 degrees C, 80 degrees C, and 90 degrees C for 3.5 min and subsequently exposed to cocktails of vancomycin, rifampicin and NAC at clinically relevant concentrations over 24 h. Results: In the control group without induction heating, 2.2*10(7) colony forming units (CFU)/cm(2) were observed. At 50 degrees C, 60 degrees C, 70 degrees C, 80 degrees C, and 90 degrees C, a reduction of 0.3-log, 3.9-log, 4.2-log, 4.3-log, and 6.6-log CFU/cm(2) were observed, respectively. There was synergy between antibiotics and induction heating that resulted in less than 100 CFU/cm(2) remaining after 3.5 min at 60 degrees C, and exposure to vancomycin and rifampicin. Total eradication was observed at 80 degrees C. Total eradication was also observed at 60 degrees C and a cocktail of antibiotics with NAC. Conclusion: Induction heating of titanium alloy coupons is effective for the reduction of bacterial load in vitro in S. aureus biofilms. Induction heating and cocktails of antibiotics and NAC have a synergistic effect that results in the total eradication of the biofilm at 60 degrees C and higher for clinically relevant concentrations of vancomycin, rifampicin and NAC. Show less
The purpose of this paper is to determine the prevalence of metal-on-metal (MoM) total hip replacement (THR) in European registries, to assess the incidence of revision surgery and to describe the... Show moreThe purpose of this paper is to determine the prevalence of metal-on-metal (MoM) total hip replacement (THR) in European registries, to assess the incidence of revision surgery and to describe the national follow-up guidelines for patients with MoM THR including resurfacings.Eleven registries of the Network of Orthopaedic Registries of Europe (NORE) participated totalling 54 434 resurfacings and 58 498 large stemmed MoM THRs.The resurfacings and stemmed large head MoM had higher pooled revision rates at five years than the standard total hip arthroplasties (THA): 6.0%, 95% confidence interval (CI) 5.3 to 6.8 for resurfacings; 6.9%, 95% CI 4.4 to 9.4 for stemmed large head MoM; and 3.0%, 95% CI 2.5 to 3.6 for conventional THA.The resurfacings and stemmed large head MoM had higher pooled revision rates at ten years than the standard THAs: 12.1%, 95% CI 11.0 to 13.3 for resurfacings; 15.5%, 95% CI 9.0 to 22 for stemmed large head MoM; and 5.1%, 95% CI 3.8 to 6.4 for conventional THA.Although every national registry reports slightly different protocols for follow-up, these mostly consist of annual assessments of cobalt and chromium levels in blood and MRI (MARS) imaging. Show less