Nanoplastics can cause severe malformations in chicken embryos. To improve our understanding of the toxicity of nanoplastics to embryos, we have studied their biodistribution in living chicken... Show moreNanoplastics can cause severe malformations in chicken embryos. To improve our understanding of the toxicity of nanoplastics to embryos, we have studied their biodistribution in living chicken embryos. We injected the embryos in the vitelline vein at stages 18–19. We injected polystyrene nanoparticles (PS-NPs) tagged with europium- or fluorescence. Their biodistribution was tracked using inductively-coupled plasma mass spectrometry on tissue lysates, paraffin histology, and vibratome sections analysed by machine learning algorithms. PS-NPs were found at high levels in the heart, liver and kidneys. Furthermore, PS-NPs crossed the endocardium of the heart at sites of epithelial-mesenchymal transformation; they also crossed the liver endothelium. Finally, we detected PS-NPs in the allantoic fluid, consistent with their being excreted by the kidneys. Our study shows the power of the chicken embryo model for analysing the biodistribution of nanoplastics in embryos. Such experiments are difficult or impossible in mammalian embryos. These findings are a major advance in our understanding of the biodistribution and tissue-specific accumulation of PS-NPs in developing animals. Show less
In Noord-Holland zijn zeer gevaarlijke en verboden stoffen aangetroffen in het water. Het gaat om het onkruidbestrijdingsmiddel dinoterb en de insecticide fenchloorfos. Op de vergadering van het... Show moreIn Noord-Holland zijn zeer gevaarlijke en verboden stoffen aangetroffen in het water. Het gaat om het onkruidbestrijdingsmiddel dinoterb en de insecticide fenchloorfos. Op de vergadering van het waterschap spraken heel veel geschrokken burgers hun zorgen uit. Over gif in de regenton, of ze nog wel kunnen zwemmen in openbaar water en of het drinkwater wel veilig is. Een verslag van de insprekers Een verslag van de insprekers, de eerste reactie van de GGD Hollands Noorden en de visie van ecotoxicoloog Martina Vijver. Show less
III–V/Silicon tandem solar cells offer one of the most promising avenues for high-efficiency, high-stability photovoltaics. However, a key concern is the potential environmental release of group... Show moreIII–V/Silicon tandem solar cells offer one of the most promising avenues for high-efficiency, high-stability photovoltaics. However, a key concern is the potential environmental release of group III–V elements, especially arsenic. To inform long-term policies on the energy transition and energy security, we develop and implement a framework that fully integrates future PV demand scenarios with dynamic stock, emission, and fate models in a probabilistic ecological risk assessment. We examine three geographical scales: local (including a floating utility-scale PV and waste treatment), regional (city-wide), and continental (Europe). Our probabilistic assessment considers a wide range of possible values for over one hundred uncertain technical, environmental, and regulatory parameters. We find that III–V/silicon PV integration in energy grids at all scales presents low-to-negligible risks to soil and freshwater organisms. Risks are further abated if recycling of III–V materials is considered at the panels' end-of-life. Show less
Agricultural lands have been identified as plastic sinks. One source is plastic mulches, which are a source of micro- and nano-sized plastics in agricultural soils. Because of their persistence,... Show moreAgricultural lands have been identified as plastic sinks. One source is plastic mulches, which are a source of micro- and nano-sized plastics in agricultural soils. Because of their persistence, there is now a push towards developing biodegradable plastics, which are designed to undergo (partial) breakdown after entering the environment. Yet, limited research has investigated the impacts of both conventional and biodegradable plastics on distinct plants. Moreover, comparisons among studies are difficult due to differences in experimental design. This study directly compares the effects of artificially weathered conventional polyethylene (PE) and starch-based biodegradable polybutylene adipate terephthalate (PBAT) on four food crops, including two monocots (barley, Hordeum vulgare, and wheat, Triticum aestivum L.) and two dicots (carrot, Daucus carota, and lettuce, Lactuca sativa L.). We investigated the effects of environmentally relevant low, medium, and high (0.01 %, 0.1 %, 1 % w/w) concentrations of PE and starch-PBAT blend on seed germination (acute toxicity), and subsequently on plant growth and chlorophyll through a pot-plant experiment (chronic toxicity). Germination of all species was not affected by both plastics. However, root length was reduced for lettuce and wheat seedlings. No other effects were recorded on monocots. We observed a reduction in shoot length and bud wet weight of carrot seedlings for the highest concentration of PE and starch-PBAT blend. Chronic exposure resulted in a significant decrease in shoot biomass of barley and lettuce. Additionally, a positive increase in the number of leaves of lettuce was observed for both plastics. Chlorophyll content was increased in lettuce when exposed to PE and starch-PBAT blend. Overall, adverse effects in dicots were more abundant than in monocots. Importantly, we found that the biodegradable plastic caused more commonly adverse effects on plants compared to conventional plastic, which was confirmed by a mini-review of studies directly comparing the impact of conventional and biodegradable microplastics. Show less
Advanced materials comprising multiple metal alloys have made their way into the market. Trimetal-based nanomaterials (TNMs) are an example of advanced materials which have gained significant... Show moreAdvanced materials comprising multiple metal alloys have made their way into the market. Trimetal-based nanomaterials (TNMs) are an example of advanced materials which have gained significant traction and are now employed in a wide array of products. It is essential to raise the question if the toxicity of advanced nanomaterials like TNMs differs from the joint effects as manifested by exposure to the single component nanoparticles (NPs). To answer this question, a trimetal-based nanomaterial: bismuth cobalt zinc oxide (BiCoZnO) was tested. This TNM had a mass ratio of 90 % ZnO NPs, 7 % Bi2O3 NPs and 3 % Co3O4 NPs. Nanoparticle-exposed lettuce seedlings (Lactuca sativa L.) showed decreases in relative root elongation (RRE) and biomass production after 21 days of exposure. The 50 % of maximal effective concentration (EC50) value of the TNMs for biomass production was 1.2 mg L− 1 when the exposure period was 240 h. This is of the same magnitude as the EC50 values found for ZnO NPs (EC50 = 1.5 mg L− 1 ) and for the mixture of components NPs (MCNPs) which jointly form the TNMs (EC50 = 3.7 mg L− 1 ) after 10 d of exposure. The inhibition of plant root elongation by the TNMs was partially (65 %) attributed to the release of Zn ions, with the actual concentration of released Zn ions being lower in TNMs compared to the actual concentration of Zn ions in case of ZnO NPs. It is therefore to be concluded that the concentration of Zn ions cannot be used as a direct measure to compare the toxicity between traditional and advanced Zn-related nanomaterials. The EC50 values could be assessed within a factor of two; which is helpful when developing advanced alloy nanomaterials and assessing prospective the effects of trimetal-based nanomaterials. Show less
Dissolution of nanoparticles (NPs) determines the fate and subsequently the actual exposure of biota to the NPs. Whether and to what extent NPs dissolve or remain in their particulate form in... Show moreDissolution of nanoparticles (NPs) determines the fate and subsequently the actual exposure of biota to the NPs. Whether and to what extent NPs dissolve or remain in their particulate form in aqueous media is thus of pivotal knowledge for the safety assessments of NPs. In this research, secondary data on dissolution of NPs were systematically collected. A range of dissolution rates could be recalculated, as dependent on the characteristics of the NPs and the exposure medium. For example, two nanoparticles which are identical in terms of chemical composition of the particle core and of the coating, had a fully different dissolution behaviour, as subject to different surface modifications. A model was derived for calculating dissolution rate constants of NPs. The model is based on the initial kinetics of dissolution of NPs under different exposure scenarios and on the assumption of pseudo-first order reaction kinetics at the particle surface. Characterizing the dissolution rates and the parameters which modify dissolution allows for grouping of those NPs that dissolve either very slowly or very quickly. This information can be used for risk assessment of NPs, and once sufficient kinetic dissolution data are available, will ultimately allow for development of predictive models for the dissolution kinetics of newly developed nanomaterials. Show less
Zantis, L.J.; Borchi, C.; Vijver, M.G.; Peijnenburg, W.J.G.M.; Di Lonardo, S.; Bosker, T. 2023
Over the last years there has been significant research on the presence and effects of plastics in terrestrial systems. Here we summarize current research findings on the effects of nano- and... Show moreOver the last years there has been significant research on the presence and effects of plastics in terrestrial systems. Here we summarize current research findings on the effects of nano- and microplastics (NMPs) on terrestrial plants, with the aim to determine patterns of response and sensitive endpoints. We conducted a systematic review (based on 78 studies) on the effects of NMPs on germination, plant growth and biochemical biomarkers. This review highlights that the majority of studies to date have used pristine polystyrene or polyethylene particles, either in a hydroponic or pot-plant setup. Based on these studies we found that effects on plants are widespread. We noted similar responses between and within monocots and dicots to NMPs, except for consistent lower germination seen in dicots exposed to NMPs. During early development, germination and root growth are more strongly affected compared to shoot growth. NMPs induced similar adverse growth effects on plant biomass and length in the most tested plant species (lettuce, wheat, corn, and rice) irrespective of the polymer type and size used. Moreover, biomarker responses were consistent across species; chlorophyll levels were commonly negatively affected, while stress indicators (e.g., ROS or free radicals) and stress respondents (e.g., antioxidant enzymes) were consistently upregulated. In addition, effects were commonly observed at environmentally relevant levels. These findings provide clear evidence that NMPs have wide-ranging impacts on plant performance. However, as most studies have been conducted under highly controlled conditions and with pristine plastics, there is an urgent need to test under more environmentally realistic conditions to ensure the lab-based studies can be extrapolated to the field. Show less
Since the soil quality Tool for Risk Identification, Assessment and Display approach introduced the “three lines of evidence” accounting for chemical, toxicological and ecological stressors to... Show moreSince the soil quality Tool for Risk Identification, Assessment and Display approach introduced the “three lines of evidence” accounting for chemical, toxicological and ecological stressors to explain adverse effects in biota, the assessment of contaminant risks in the environment has significantly evolved. The concept of chemical speciation, related to water characteristics, boosted the understanding of the role of free-ion activities in the overall accumulation of pollutants in biota. New modeling concepts (e.g. biotic ligand models) and measuring techniques were developed. This in turn triggered widespread research addressing the quantitative role of sediment in the overall water quality, focusing on redox interfaces. For contaminant mixtures in river catchments, complex relations between (bio)availability of compounds, including nutrients, help to explain aquatic toxicity. Variation in ecological patterns and processes across environmental or spatiotemporal gradients occur, which may identify ecological factors that influence contaminant fate and effects. Empirical evidence by meta-analysis and theoretical underpinning by modelling showed relationships between population growth rates and carrying capacities, across chemicals and across species. The potentially affected fraction (PAF) of species may be related to the mean species abundance, an often-used indicator in global change studies. Knowledge gaps remain on how pollutants travel through ecological communities and which species and species-relationships are affected. Outdoor experimental systems that examine the natural environment under controlled conditions may be useful at the higher biological level to investigate the impact of stressors on a variety of species, including mutual interactions. Show less
Wang, M.R.; Rücklin, M.; Poelmann, R.E.; Mooij, C.L. de; Fokkema, M.; Lamers, G.E.M.; ... ; Richardson, M.K. 2023
Nanomaterials are widespread in the human environment as pollutants, and are being actively developed for use in human medicine. We have investigated how the size and dose of polystyrene... Show moreNanomaterials are widespread in the human environment as pollutants, and are being actively developed for use in human medicine. We have investigated how the size and dose of polystyrene nanoparticles affects malformations in chicken embryos, and have characterized the mechanisms by which they interfere with normal development. We find that nanoplastics can cross the embryonic gut wall. When injected into the vitelline vein, nanoplastics become distributed in the circulation to multiple organs. We find that the exposure of embryos to polystyrene nanoparticles produces malformations that are far more serious and extensive than has been previously reported. These malformations include major congenital heart defects that impair cardiac function. We show that the mechanism of toxicity is the selective binding of polystyrene nanoplastics nanoparticles to neural crest cells, leading to the death and impaired migration of those cells. Consistent with our new model, most of the malformations seen in this study are in organs that depend for their normal development on neural crest cells. These results are a matter of concern given the large and growing burden of nanoplastics in the environment. Our findings suggest that nanoplastics may pose a health risk to the developing embryo. Show less
Wang, M.; Rücklin, M.; Poelmann, R.E.; Mooij, C.L. de; Fokkema, M.; Lamers, G.E.M.; ... ; Richardson, M.K. 2023
Nanomaterials are widespread in the human environment as pollutants, and are being actively developed for use in human medicine. We have investigated how the size and dose of polystyrene... Show moreNanomaterials are widespread in the human environment as pollutants, and are being actively developed for use in human medicine. We have investigated how the size and dose of polystyrene nanoparticles affects malformations in chicken embryos, and have characterized the mechanisms by which they interfere with normal development. We find that nanoplastics can cross the embryonic gut wall. When injected into the vitelline vein, nanoplastics become distributed in the circulation to multiple organs. We find that the exposure of embryos to polystyrene nanoparticles produces malformations that are far more serious and extensive than has been previously reported. These malformations include major congenital heart defects that impair cardiac function. We show that the mechanism of toxicity is the selective binding of polystyrene nanoplastics nanoparticles to neural crest cells, leading to the death and impaired migration of those cells. Consistent with our new model, most of the malformations seen in this study are in organs that depend for their normal development on neural crest cells. These results are a matter of concern given the large and growing burden of nanoplastics in the environment. Our findings suggest that nanoplastics may pose a health risk to the developing embryo. Show less
Ongoing efforts focus on quantifying plastic pollution and describing and estimating the related magnitude of exposure and impacts on human and environmental health. Data gathered during such work... Show moreOngoing efforts focus on quantifying plastic pollution and describing and estimating the related magnitude of exposure and impacts on human and environmental health. Data gathered during such work usually follows a receptor perspective. However, Life Cycle Assessment (LCA) represents an emitter perspective. This study examines existing data gathering and reporting approaches for field and laboratory studies on micro- and nanoplastics (MNPs) exposure and effects relevant to LCA data inputs. The outcomes indicate that receptor perspective approaches do not typically provide suitable or sufficiently harmonised data. Improved design is needed in the sampling, testing and recording of results using harmonised, validated and comparable methods, with more comprehensive reporting of relevant data. We propose a three-level set of requirements for data recording and reporting to increase the potential for LCA studies and models to utilise data gathered in receptor-oriented studies. We show for which purpose such data can be used as inputs to LCA, particularly in life cycle impact assessment (LCIA) methods. Implementing these requirements will facilitate proper integration of the potential environmental impacts of plastic losses from human activity (e.g. litter) into LCA. Then, the impacts of plastic emissions can eventually be connected and compared with other environmental issues related to anthropogenic activities. Show less
Herein, we investigated to which extent metallic nanoparticles (MNPs) affect the trophic transfer of other coexisting MNPs from lettuce to terrestrial snails and the associated tissue-specific... Show moreHerein, we investigated to which extent metallic nanoparticles (MNPs) affect the trophic transfer of other coexisting MNPs from lettuce to terrestrial snails and the associated tissue-specific distribution using toxicokinetic (TK) modeling and single-particle inductively coupled plasma mass spectrometry. During a period of 22 days, snails were fed with lettuce leaves that were root exposed to AgNO3 (0.05 mg/L), AgNPs (0.75 mg/L), TiO2NPs (200 mg/L), and a mixture of AgNPs and TiO2NPs (equivalent doses as for single NPs). The uptake rate constants (ku) were 0.08 and 0.11 kg leaves/kg snail/d for Ag and 1.63 and 1.79 kg leaves/kg snail/d for Ti in snails fed with NPs single- and mixture-exposed lettuce, respectively. The elimination rate constants (ke) of Ag in snails exposed to single AgNPs and mixed AgNPs were comparable to the corresponding ku, while the ke for Ti were lower than the corresponding ku. As a result, single TiO2NP treatments as well as exposure to mixtures containing TiO2NPs induced significant biomagnification from lettuce to snails with kinetic trophic transfer factors (TTFk) of 7.99 and 6.46. The TTFk of Ag in the single AgNPs treatment (1.15 kg leaves/kg snail) was significantly greater than the TTFk in the mixture treatment (0.85 kg leaves/kg snail), while the fraction of Ag remaining in the body of snails after AgNPs exposure (36%) was lower than the Ag fraction remaining after mixture exposure (50%). These results indicated that the presence of TiO2NPs inhibited the trophic transfer of AgNPs from lettuce to snails but enhanced the retention of AgNPs in snails. Biomagnification of AgNPs from lettuce to snails was observed in an AgNPs single treatment using AgNPs number as the dose metric, which was reflected by the particle number-based TTFs of AgNPs in snails (1.67, i.e., higher than 1). The size distribution of AgNPs was shifted across the lettuce-snail food chain. By making use of particle-specific measurements and fitting TK processes, this research provides important implications for potential risks associated with the trophic transfer of MNP mixtures. Show less
The wide production and use of metallic nanomaterials (MNMs) leads to increased emissions into the aquatic environments and induces high potential risks. Experimentally evaluating the (eco)toxicity... Show moreThe wide production and use of metallic nanomaterials (MNMs) leads to increased emissions into the aquatic environments and induces high potential risks. Experimentally evaluating the (eco)toxicity of MNMs is time-consuming and expensive due to the multiple environmental factors, the complexity of material properties, and the species diversity. Machine learning (ML) models provide an option to deal with heterogeneous data sets and complex relationships. The present study established an in silico model based on a machine learning properties-environmental conditions-multi species-toxicity prediction model (ML-PEMST) that can be applied to predict the toxicity of different MNMs toward multiple aquatic species. Feature importance and interaction analysis based on the random forest method indicated that exposure duration, illumination, primary size, and hydrodynamic diameter were the main factors affecting the ecotoxicity of MNMs to a variety of aquatic organisms. Illumination was demonstrated to have the most interaction with the other features. Moreover, incorporating additional detailed information on the ecological traits of the test species will allow us to further optimize and improve the predictive performance of the model. This study provides a new approach for ecotoxicity predictions for organisms in the aquatic environment and will help us to further explore exposure pathways and the risk assessment of MNMs. Show less
Owsianiak, M.; Hauschild, M.Z.; Posthuma, L.; Saouter, E.; Vijver, M.G.; Backhaus, T.; ... ; Fantke, P. 2023
Chemicals emitted to the environment affect ecosystem health from local to global scale, and reducing chemical impacts has become an important element of European and global sustainability efforts.... Show moreChemicals emitted to the environment affect ecosystem health from local to global scale, and reducing chemical impacts has become an important element of European and global sustainability efforts. The present work ad-vances ecotoxicity characterization of chemicals in life cycle impact assessment by proposing recommendations resulting from international expert workshops and work conducted under the umbrella of the UNEP-SETAC Life Cycle Initiative in the GLAM project (Global guidance on environmental life cycle impact assessment indicators). We include specific recommendations for broadening the assessment scope through proposing to introduce additional environmental compartments beyond freshwater and related ecotoxicity indicators, as well as for adapting the ecotoxicity effect modelling approach to better reflect environmentally relevant exposure levels and including to a larger extent chronic test data. As result, we (1) propose a consistent mathematical framework for calculating freshwater ecotoxicity characterization factors and their underlying fate, exposure and effect pa-rameters; (2) implement the framework into the USEtox scientific consensus model; (3) calculate characteriza-tion factors for chemicals reported in an inventory of a life cycle assessment case study on rice production and consumption; and (4) investigate the influence of effect data selection criteria on resulting indicator scores. Our results highlight the need for careful interpretation of life cycle assessment impact scores in light of robustness of underlying species sensitivity distributions. Next steps are to apply the recommended characterization frame-work in additional case studies, and to adapt it to soil, sediment and the marine environment. Our framework is applicable for evaluating chemicals in life cycle assessment, chemical and environmental footprinting, chemical substitution, risk screening, chemical prioritization, and comparison with environmental sustainability targets. Show less
The Safe by Design (SbD) concept aims to ensure the production, use and disposal of materials and products safely. While there is a growing interest in the potential of SbD to support policy... Show moreThe Safe by Design (SbD) concept aims to ensure the production, use and disposal of materials and products safely. While there is a growing interest in the potential of SbD to support policy commitments, such as the EU Green Deal and the Circular Economy Action Plan in Europe, methodological approaches and practical guidelines on SbD are, however, largely missing. The combined use of Life Cycle Assessment (LCA) and Risk Assessment (RA) is considered suitable to operationalize SbD over the whole life-cycle of a product. Here, we explore the potential of the combined use of LCA and RA at Technological Readiness Level (TRL) 1–6. We perform a review of the literature presenting and/or developing approaches that combine LCA and RA at early stages of product design. We identify that basic early-on-evaluations of safety (e.g., apply lifecycle thinking to assess risk hotspots, avoid use of hazardous chemicals, minimize other environmental impacts from chemicals) are more common, while more complex assessments (e.g., ex-ante LCA, control banding, predictive (eco)toxicology) require specialized expertise. The application of these simplified approaches and guidelines aims to avoid some obvious sources of risks and impacts at early stages. Critical gaps need to be addressed for wider application of SbD, including more studies in the product design context, developing tools and databases containing collated information on risk, greater collaboration between RA/LCA researchers and companies, and policy discussion on the expansion from SbD to Safe and Sustainable by Design (SSbD). Show less
