Purpose: The primary objective of this study was to determine the feasibility of ablation margin quantification using a standardized scanning protocol during thermal ablation (TA) of hepatocellular... Show morePurpose: The primary objective of this study was to determine the feasibility of ablation margin quantification using a standardized scanning protocol during thermal ablation (TA) of hepatocellular carcinoma (HCC), and a rigid registration algorithm. Secondary objectives were to determine the inter- and intra-observer variability of tumor segmentation and quantification of the minimal ablation margin (MAM). Materials and methods: Twenty patients who underwent thermal ablation for HCC were included. There were thirteen men and seven women with a mean age of 67.1 +/- 10.8 (standard deviation [SD]) years (age range: 49.1-81.1 years). All patients underwent contrast-enhanced computed tomography examination under general anesthesia directly before and after TA, with preoxygenated breath hold. Contrast-enhanced computed tomography examinations were analyzed by radiologists using rigid registration software. Registration was deemed feasible when accurate rigid co-registration could be obtained. Inter- and intra-observer rates of tumor segmentation and MAM quantification were calculated. MAM values were correlated with local tumor progression (LTP) after one year of follow-up. Results: Co-registration of pre- and post-ablation images was feasible in 16 out of 20 patients (80%) and 26 out of 31 tumors (84%). Mean Dice similarity coefficient for inter- and intra-observer variability of tumor segmentation were 0.815 and 0.830, respectively. Mean MAM was 0.63 +/- 3.589 (SD) mm (range: -6.26 -6.65 mm). LTP occurred in four out of 20 patients (20%). The mean MAM value for patients who developed LTP was -4.00 mm, as compared to 0.727 mm for patients who did not develop LTP. Conclusion: Ablation margin quantification is feasible using a standardized contrast-enhanced computed tomography protocol. Interpretation of MAM was hampered by the occurrence of tissue shrinkage during TA. Further validation in a larger cohort should lead to meaningful cut-off values for technical success of TA. (c) 2023 The Author(s). Published by Elsevier Masson SAS on behalf of Societe francaise de radiologie. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/) Show less
Patients with acute coronary syndromes caused by plaque erosion might be managed conservatively without stenting. Currently, the diagnosis of plaque erosion requires an invasive imaging procedure.... Show morePatients with acute coronary syndromes caused by plaque erosion might be managed conservatively without stenting. Currently, the diagnosis of plaque erosion requires an invasive imaging procedure. We sought to develop a deep learning (DL) model that enables an accurate diagnosis of plaque erosion using coronary computed tomography angiography (CTA). A total of 532 CTA scans from 395 patients were used to develop a DL model: 426 CTA scans from 316 patients for training and internal validation, and 106 separate scans from 79 patients for validation. Momentum Distillation-enhanced Composite Transformer Attention (MD-CTA), a novel DL model that can effectively process the entire set of CTA scans to diagnose plaque erosion, was developed. The novel DL model, compared to the convolution neural network, showed significantly improved AUC (0.899 [0.841-0.957] vs. 0.724 [0.622-0.826]), sensitivity (87.1 [70.2-96.4] vs. 71.0 [52.0-85.8]), and specificity (85.3 [75.3-92.4] vs. 68.0 [56.2-78.3]), respectively, for the patient-level prediction. Similar results were obtained at the slice-level prediction AUC (0.897 [0.890-0.904] vs. 0.757 [0.744-0.770]), sensitivity (82.2 [79.8-84.3] vs. 68.9 [66.2-71.6]), and specificity (80.1 [79.1-81.0] vs. 67.3 [66.3-68.4]), respectively. This newly developed DL model enables an accurate CT diagnosis of plaque erosion, which might enable cardiologists to provide tailored therapy without invasive procedures.Clinical Trial Registration:http://www.clinicaltrials.gov, NCT04523194. Show less
Driest, F.Y. van; Broersen, A.; Geest, R.J. van der; Jukema, J.W.; Scholte, A.J.H.A.; Dijkstra, J. 2023
Introduction: The use of serial coronary computed tomography angiography (CCTA) allows for the early assessment of coronary plaque progression, a crucial factor in averting major adverse cardiac... Show moreIntroduction: The use of serial coronary computed tomography angiography (CCTA) allows for the early assessment of coronary plaque progression, a crucial factor in averting major adverse cardiac events (MACEs). Traditionally, serial CCTA is assessed using anatomical landmarks to match baseline and follow-up scans. Recently, a tool has been developed that allows for the automatic quantification of local plaque thickness differences in serial CCTA utilizing plaque contour delineation.The aim of this study was to determine thresholds of plaque thickness differences that define whether there is plaque progression and/or regression. These thresholds depend on the contrast-to-noise ratio (CNR). Methods: Plaque thickness differences between two scans acquired at the same moment in time should always be zero. The negative and positive differences in plaque contour delineation in these scans were used along with the CNR in order to create calibration graphs on which a linear regression analysis was performed. This analysis was conducted on a cohort of 50 patients referred for a CCTA due to chest complaints. A total of 300 coronary vessels were analyzed. First, plaque contours were semi-automatically determined for all major epicardial coronary vessels. Second, manual drawings of seven regions of interest (ROIs) per scan were used to quantify the scan quality based on the CNR for each vessel. Results: A linear regression analysis was performed on the CNR and negative and positive plaque contour delineation differences. Accounting for the standard error of the estimate, the linear regression analysis revealed that above 1.009 - 0.002 9 CNR there is an increase in plaque thickness (progression), and below - 1.638 ? 0.012 9 CNR there is a decrease in plaque thickness (regression). Conclusion: This study demonstrates the feasibility of developing vessel-specific, qualitybased thresholds for visualizing local plaque thickness differences evaluated by serial CCTA. These thresholds have the potential to facilitate the early detection of atherosclerosis progression. Show less
Kuneman, J.H.; Hoogen, I.J. van den; Schultz, J.; Maaniitty, T.; Rosendael, A.R. van; Kamperidis, V.; ... ; Knuuti, J. 2023
Background: The various plaque components have been associated with ischemia and outcomes in patients with coronary artery disease (CAD). The main goal of this analysis was to test the hypothesis... Show moreBackground: The various plaque components have been associated with ischemia and outcomes in patients with coronary artery disease (CAD). The main goal of this analysis was to test the hypothesis that, at patient level, the fraction of non-calcified plaque volume (PV) of total PV is associated with ischemia and outcomes in patients with CAD. This ratio could be a simple and clinically useful parameter, if predicting outcomes. Methods: Consecutive patients with suspected CAD undergoing coronary computed tomography angiography with selective positron emission tomography perfusion imaging were selected. Plaque components were quantitatively analyzed at patient level. The fraction of various plaque components were expressed as percentage of total PV and examined among patients with non-obstructive CAD, suspected stenosis with normal perfusion, and those with reduced myocardial perfusion. Clinical outcomes included all-cause mortality and myocardial infarction. Results: In total, 494 patients (age 63 & PLUSMN; 9 years, 55% male) were included. Total PV and all plaque components were significantly larger in patients with reduced myocardial perfusion compared to patients with normal perfusion and those with non-obstructive CAD. During follow-up 35 events occurred. Patients with any plaque component & GE; median showed worse outcomes (log-rank p < 0.001 for all). In addition, low-attenuation plaque & GE; median was associated with worse outcomes independent of total PV (adjusted HR: 2.754, 95% CI: 1.022-7.0419, p = 0.045). The fractions of the various plaque components were not associated with outcomes. Conclusion: Larger total PV or any plaque component at patient level are associated with abnormal myocardial perfusion and adverse events. The various plaque components as fraction of total PV lack additional prognostic value. Show less
Purpose: To assess the quantitative minimal ablation margin (MAM) in patients with colorectal liver metastases (CRLM) treated with percutaneous thermal ablation (TA) and correlate the quantitative... Show morePurpose: To assess the quantitative minimal ablation margin (MAM) in patients with colorectal liver metastases (CRLM) treated with percutaneous thermal ablation (TA) and correlate the quantitative MAM with local tumour recurrence (LTR).Method: Thirty-nine of 143 patients with solitary or multiple CRLM who underwent a first percutaneous TA procedure between January 2011 and May 2020 were considered eligible for study enrolment. Image fusion of pre-and post-ablation scans and 3D quantitative MAM assessment was performed using the in-house developed semi-automatic rigid MRI/CECT-CECT co-registration software deLIVERed. The quantitative MAM was analysed and correlated with LTR.Results: Eighteen (46 %) patients were additionally excluded from further analyses due to suboptimal co -registration (quality co-registration score < 3). The quality of co-registration was considered sufficient in 21 (54 %) patients with a total of 29 CRLM. LTR was found in 5 of 29 (17 %) TA-treated CRLM. In total, 12 (41 %) negative MAMs were measured (mean MAM-4.7 +/- 2.7 mm). Negative MAMs were significantly more frequently seen in patients who developed LTR (100 %) compared to those without LTR (29 %; p = 0.003). The median MAM of patients who developed LTR (-6.6 mm (IQR-9.5 to-4.6)) was significantly smaller compared to the median MAM of patients without LTR (0.5 mm (IQR-1.8 to 3.0); p < 0.001). The ROC curve showed high accuracy in predicting LTR for the quantitative MAM (area under the curve of 0.975 +/- 0.029).Conclusion: This study demonstrated the feasibility of 3D quantitative MAM assessment, using deLIVERed co -registration software, to assess technical success of TA in patients with CRLM and to predict LTR. Show less
Schultz, J.; Hoogen, I.J. van den; Kuneman, J.H.; Graaf, M.A. de; Kamperidis, V.; Broersen, A.; ... ; Knuuti, J. 2022
Endothelial wall shear stress (ESS) is a biomechanical force which plays a role in the formation and evolution of atherosclerotic lesions. The purpose of this study is to evaluate coronary computed... Show moreEndothelial wall shear stress (ESS) is a biomechanical force which plays a role in the formation and evolution of atherosclerotic lesions. The purpose of this study is to evaluate coronary computed tomography angiography (CCTA)-based ESS in coronary arteries without atherosclerosis, and to assess factors affecting ESS values. CCTA images from patients with suspected coronary artery disease were analyzed to identify coronary arteries without atherosclerosis. Minimal and maximal ESS values were calculated for 3-mm segments. Factors potentially affecting ESS values were examined, including sex, lumen diameter and distance from the ostium. Segments were categorized according to lumen diameter tertiles into small (< 2.6 mm), intermediate (2.6-3.2 mm) or large (>= 3.2 mm) segments. A total of 349 normal vessels from 168 patients (mean age 59 +/- 9 years, 39% men) were included. ESS was highest in the left anterior descending artery compared to the left circumflex artery and right coronary artery (minimal ESS 2.3 Pa vs. 1.9 Pa vs. 1.6 Pa, p < 0.001 and maximal ESS 3.7 Pa vs. 3.0 Pa vs. 2.5 Pa, p < 0.001). Men had lower ESS values than women, also after adjusting for lumen diameter (p < 0.001). ESS values were highest in small segments compared to intermediate or large segments (minimal ESS 3.8 Pa vs. 1.7 Pa vs. 1.2 Pa, p < 0.001 and maximal ESS 6.0 Pa vs. 2.6 Pa vs. 2.0 Pa, p < 0.001). A weak to strong correlation was found between ESS and distance from the ostium (rho = 0.22-0.62, p < 0.001). CCTA-based ESS values increase rapidly and become widely scattered with decreasing lumen diameter. This needs to be taken into account when assessing the added value of ESS beyond lumen diameter in highly stenotic lesions. Show less
Hoogen, I.J. van den; Schultz, J.; Kuneman, J.H.; Graaf, M.A. de; Kamperidis, V.; Broersen, A.; ... ; Knuuti, J. 2022
Aims Evolving evidence suggests that endothelial wall shear stress (ESS) plays a crucial role in the rupture and progression of coronary plaques by triggering biological signalling pathways. We... Show moreAims Evolving evidence suggests that endothelial wall shear stress (ESS) plays a crucial role in the rupture and progression of coronary plaques by triggering biological signalling pathways. We aimed to investigate the patterns of ESS across coronary lesions from non-invasive imaging with coronary computed tomography angiography (CCTA), and to define plaque-associated ESS values in patients with coronary artery disease (CAD). Methods and results: Symptomatic patients with CAD who underwent a clinically indicated CCTA scan were identified. Separate core laboratories performed blinded analysis of CCTA for anatomical and ESS features of coronary atherosclerosis. ESS was assessed using dedicated software, providing minimal and maximal ESS values for each 3 mm segment. Each coronary lesion was divided into upstream, start, minimal luminal area (MLA), end and downstream segments. Also, ESS ratios were calculated using the upstream segment as a reference. From 122 patients (mean age 64 +/- 7 years, 57% men), a total of 237 lesions were analyzed. Minimal and maximal ESS values varied across the lesions with the highest values at the MLA segment [minimal ESS 3.97 Pa (IQR 1.93-8.92 Pa) and maximal ESS 5.64 Pa (IQR 3.13-11.21 Pa), respectively]. Furthermore, minimal and maximal ESS values were positively associated with stenosis severity (P < 0.001), percent atheroma volume (P < 0.001), and lesion length (P <= 0.023) at the MLA segment. Using ESS ratios, similar associations were observed for stenosis severity and lesion length. Conclusions: Detailed behaviour of ESS across coronary lesions can be derived from routine non-invasive CCTA imaging. This may further improve risk stratification. Show less
Background: Robotic liver surgery represents the most recent evolution in the field of minimally-invasive liver surgery. For planning and guidance of liver resections, surgeons currently rely on... Show moreBackground: Robotic liver surgery represents the most recent evolution in the field of minimally-invasive liver surgery. For planning and guidance of liver resections, surgeons currently rely on preoperative 2-dimensional (2D) CT and/or MR imaging and intraoperative ultrasonography. Translating 2D images into digital 3-dimensional (3D) models may improve both preoperative planning and surgical guidance. The da Vinci (R) robotic surgical system is a platform suitable for the integration of multiple imaging modalities into one single view. In this study, we describe multimodal imaging options and introduce the Robotic Liver Surgery Cockpit; Methods: in-house developed software was used and validated for segmentation and registration to create a virtual reality 3D model of the liver based on preoperative imaging. The accuracy of the 3D models in the clinical setting was objectively assessed in 15 patients by measuring tumor diameters and subjectively with a postoperative conducted questionnaire; Results: Implementation and applicability of the 3D model in the surgical cockpit was feasible in all patients and the quality of the 3D reconstructions was high in 14 (93%) of cases. Tumor diameters measured on CT and/or MR imaging were comparable to automated measurements using the segmentation software and 3D models; Conclusions: the 3D model was successfully incorporated in the robotic surgery console as part of a multimodality imaging platform and aided the surgeon in planning and guidance of the resection. Future studies should focus on further automation of 3D rendering and progress into augmented reality. Show less
Purpose The primary objective is to determine the minimal ablation margin required to achieve a local recurrence rate of < 10% in patients with hepatocellular carcinoma undergoing thermal... Show morePurpose The primary objective is to determine the minimal ablation margin required to achieve a local recurrence rate of < 10% in patients with hepatocellular carcinoma undergoing thermal ablation. Secondary objectives are to analyze the correlation between ablation margins and local recurrence and to assess efficacy.Materials and Methods This study is a prospective, multicenter, non-experimental, non-comparative, open-label study. Patients > 18 years with Barcelona Clinic Liver Cancer stage 0/A hepatocellular carcinoma (or B with a maximum of two lesions < 5 cm each) are eligible. Patients will undergo dual-phase contrast-enhanced computed tomography directly before and after ablation. Ablation margins will be quantitatively assessed using co-registration software, blinding assessors (i.e. two experienced radiologists) for outcome. Presence and location of recurrence are evaluated independently on follow-up scans by two other experienced radiologists, blinded for the quantitative margin analysis. A sample size of 189 tumors (similar to 145 patients) is required to show with 80% power that the risk of local recurrence is confidently below 10%. A two-sided binomial z-test will be used to test the null hypothesis that the local recurrence rate is >= 10% for patients with a minimal ablation margin >= 2 mm. Logistic regression will be used to find the relationship between minimal ablation margins and local recurrence. Kaplan-Meier estimates are used to assess local and overall recurrence, disease-free and overall survival.Discussion It is expected that this study will result in a clear understanding of the correlation between ablation margins and local recurrence. Using co-registration software in future patients undergoing ablation for hepatocellular carcinoma may improve intraprocedural evaluation of technical success. Show less
PurposeThe primary objective is to determine the minimal ablation margin required to achieve a local recurrence rate of < 10% in patients with hepatocellular carcinoma undergoing thermal ablation.... Show morePurposeThe primary objective is to determine the minimal ablation margin required to achieve a local recurrence rate of < 10% in patients with hepatocellular carcinoma undergoing thermal ablation. Secondary objectives are to analyze the correlation between ablation margins and local recurrence and to assess efficacy.Materials and MethodsThis study is a prospective, multicenter, non-experimental, non-comparative, open-label study. Patients > 18 years with Barcelona Clinic Liver Cancer stage 0/A hepatocellular carcinoma (or B with a maximum of two lesions < 5 cm each) are eligible. Patients will undergo dual-phase contrast-enhanced computed tomography directly before and after ablation. Ablation margins will be quantitatively assessed using co-registration software, blinding assessors (i.e. two experienced radiologists) for outcome. Presence and location of recurrence are evaluated independently on follow-up scans by two other experienced radiologists, blinded for the quantitative margin analysis. A sample size of 189 tumors (~ 145 patients) is required to show with 80% power that the risk of local recurrence is confidently below 10%. A two-sided binomial z-test will be used to test the null hypothesis that the local recurrence rate is ≥ 10% for patients with a minimal ablation margin ≥ 2 mm. Logistic regression will be used to find the relationship between minimal ablation margins and local recurrence. Kaplan–Meier estimates are used to assess local and overall recurrence, disease-free and overall survival.DiscussionIt is expected that this study will result in a clear understanding of the correlation between ablation margins and local recurrence. Using co-registration software in future patients undergoing ablation for hepatocellular carcinoma may improve intraprocedural evaluation of technical success. Show less
Objectives To present an overview of studies using serial coronary computed tomography angiography (CCTA) as a tool for finding both quantitative (changes) and qualitative plaque characteristics as... Show moreObjectives To present an overview of studies using serial coronary computed tomography angiography (CCTA) as a tool for finding both quantitative (changes) and qualitative plaque characteristics as well as epicardial adipose tissue (EAT) volume changes as predictors of plaque progression and/or major adverse cardiac events (MACE) and outline the challenges and advantages of using a serial non-invasive imaging approach for assessing cardiovascular prognosis. Methods A literature search was performed in PubMed, Embase, Web of Science, Cochrane Library and Emcare. All observational cohort studies were assessed for quality using the Newcastle-Ottawa Scale (NOS). The NOS score was then converted into Agency for Healthcare Research and Quality (AHRQ) standards: good, fair and poor. Results A total of 36 articles were analyzed for this review, 3 of which were meta-analyses and one was a technical paper. Quantitative baseline plaque features seem to be more predictive of MACE and/or plaque progression as compared to qualitative plaque features. Conclusions A critical review of the literature focusing on studies utilizing serial CCTA revealed that mainly quantitative baseline plaque features and quantitative plaque changes are predictive of MACE and/or plaque progression contrary to qualitative plaque features. Significant questions regarding the clinical implications of these specific quantitative and qualitative plaque features as well as the challenges of using serial CCTA have yet to be resolved in studies using this imaging technique. Show less
Purpose: This study aims to investigate the correlation between myocardial area at risk at coronary computed tomography angiography (CCTA) and the ischemic burden derived from myocardial computed... Show morePurpose: This study aims to investigate the correlation between myocardial area at risk at coronary computed tomography angiography (CCTA) and the ischemic burden derived from myocardial computed tomography perfusion (CTP) by using the 17-segment model. Methods: Forty-two patients with chest pain complaints who underwent a combined CCTA and CTP protocol were identified. Patients with reversible ischemia at CTP and at least one stenosis of >= 50% at CCTA were selected. Myocardial area at risk was calculated using a Voronoi-based segmentation algorithm at CCTA and was defined as the sum of all territories related to a >= 50% stenosis as a percentage of the total left ventricular (LV) mass. The latter was calculated using LV contours which were automatically drawn using a machine learning algorithm. Subsequently, the ischemic burden was defined as the number of segments demonstrating relative hypoperfusion as a percentage of the total amount of segments (=17). Finally, correlations were tested between the myocardial area at risk and the ischemic burden using Pearson's correlation coefficient. Results: A total of 77 coronary lesions were assessed. Average myocardial area at risk and ischemic burden for all lesions was 59% and 23%, respectively. Correlations for >= 50% and >= 70% stenosis based myocardial area at risk compared to ischemic burden were moderate (r = 0.564; p < 0.01) and good (r = 0.708; p < 0.01), respectively. Conclusion: The relation between myocardial area at risk as calculated by using a Voronoi-based algorithm at CCTA and ischemic burden as assessed by CTP is dependent on stenosis severity. Show less
Driest, F.Y. van; Geest, R.J. van der; Broersen, A.; Dijkstra, J.; Mahdiui, M. el; Jukema, J.W.; Scholte, A.J.H.A. 2021
Combination of coronary computed tomography angiography (CCTA) and adenosine stress CT myocardial perfusion (CTP) allows for coronary artery lesion assessment as well as myocardial ischemia.... Show moreCombination of coronary computed tomography angiography (CCTA) and adenosine stress CT myocardial perfusion (CTP) allows for coronary artery lesion assessment as well as myocardial ischemia. However, myocardial ischemia on CTP is nowadays assessed semi-quantitatively by visual analysis. The aim of this study was to fully quantify myocardial ischemia and the subtended myocardial mass on CTP. We included 33 patients referred for a combined CCTA and adenosine stress CTP protocol, with good or excellent imaging quality on CTP. The coronary artery tree was automatically extracted from the CCTA and the relevant coronary artery lesions with a significant stenosis (>= 50%) were manually defined using dedicated software. Secondly, epicardial and endocardial contours along with CT perfusion deficits were semi-automatically defined in short-axis reformatted images using MASS software. A Voronoi-based segmentation algorithm was used to quantify the subtended myocardial mass, distal from each relevant coronary artery lesion. Perfusion defect and subtended myocardial mass were spatially registered to the CTA. Finally, the subtended myocardial mass per lesion, total subtended myocardial mass and perfusion defect mass (per lesion) were measured. Voronoi-based segmentation was successful in all cases. We assessed a total of 64 relevant coronary artery lesions. Average values for left ventricular mass, total subtended mass and perfusion defect mass were 118, 69 and 7 g respectively. In 19/33 patients (58%) the total perfusion defect mass could be distributed over the relevant coronary artery lesion(s). Quantification of myocardial ischemia and subtended myocardial mass seem feasible at adenosine stress CTP and allows to quantitatively correlate coronary artery lesions to corresponding areas of myocardial hypoperfusion at CCTA and adenosine stress CTP. Show less
Deseive, S.; Kupke, M.; Straub, R.; Stocker, T.J.; Broersen, A.; Kitslaar, P.; ... ; Hausleiter, J. 2021
Aims Automated coronary total plaque volume (TPV) quantification derived from coronary computed tomographic angiography (CTA) datasets provide exact and reliable assessment of calcified and non... Show moreAims Automated coronary total plaque volume (TPV) quantification derived from coronary computed tomographic angiography (CTA) datasets provide exact and reliable assessment of calcified and non-calcified coronary atheroscler- osis burden. The aim of this analysis was to investigate the long-term predictive value of TPV.Methods and results TPV was quantified in 1577 patients undergoing coronary CTA and cardiovascular events were collected during 10.5 years (interquartile range 6.0-11.4) of follow-up. The study endpoint comprised cardiac death and acute cor- onary syndrome and occurred in 59 (3.7%) patients. Coronary TPV provided additive prognostic value over clinical risk assessed with the Morise Score and coronary artery disease severity (rise in C-index from 0.744 to 0.769, P=0.03). A category-based reclassification approach combining the Morise Score and TPV revealed superior risk stratification (categorical net reclassification improvement: 0.48 with 95% CI 0.13-0.68, P< 0.001) and resulted in reclassification of 800 (51%) patients compared with the Morise Score alone. The 10-year risk for the study endpoint was 0.6% (95% CI 0-1.3) for patients classified as low risk (n = 807), 4.8% (95% CI 2.4-7.2) for patients at intermediate risk (n = 400), and 10.3% (95% CI 6.6-13.9) for patients at high risk (n = 370) using the combined reclassification approach.Conclusion Quantification of TPV from coronary CTA permits an improved 10-year cardiovascular risk stratification. Show less
Purpose: The rationale of this study was to identify patients with fast progression of coronary plaque volume PV and characterize changes in PV and plaque components over time.Method: Total PV (TPV... Show morePurpose: The rationale of this study was to identify patients with fast progression of coronary plaque volume PV and characterize changes in PV and plaque components over time.Method: Total PV (TPV) was measured in 350 patients undergoing serial coronary computed tomography angiography (median scan interval 3.6 years) using semi-automated software. Plaque morphology was assessed based on attenuation values and stratified into calcified, fibrous, fibrous-fatty and low-attenuation PV for volumetric measurements. Every plaque was additionally classified as either calcified, partially calcified or non-calcified.Results: In total, 812 and 955 plaques were detected in the first and second scan. Mean TPV increase was 20 % on a per-patient base (51.3 mm(3) [interquartile range (IQR): 14.4, 126.7] vs. 61.6 mm(3) [IQR: 16.7, 170.0]). TPV increase was driven by calcified PV (first scan: 7.6 mm(3) [IQR: 0.2, 33.6] vs. second scan: 16.6 mm(3) [IQR: 1.8, 62.1], p < 0.01). Forty-two patients showed fast progression of TPV, defined as > 1.3 mm(3) increase of TPV per month. Male sex (odds ratio 3.1, p = 0.02) and typical angina (odds ratio 3.95, p = 0.03) were identified as risk factors for fast TPV progression, while high-density lipoprotein cholesterol had a protective effect (odds ratio per 10 mg/dl increase of HDL cholesterol: 0.72, p < 0.01). Progression to > 50 % stenosis at follow-up was observed in 34 of 327 (10.4 %) calcified plaques, in 13 of 401 (3.2 %) partially calcified plaques and 2 of 221 (0.9 %) non-calcified plaques (p < 0.01).Conclusion: Fast plaque progression was observed in male patients and patients with typical angina. High HDL cholesterol showed a protective effect. Show less
Purpose Currently, coronary plaque changes are manually compared between a baseline and follow-up coronary computed tomography angiography (CCTA) images for long-term coronary plaque development... Show morePurpose Currently, coronary plaque changes are manually compared between a baseline and follow-up coronary computed tomography angiography (CCTA) images for long-term coronary plaque development investigation. We propose an automatic method to measure the plaque thickness change over time. Methods We model the lumen and vessel wall for both the baseline coronary artery tree (CAT-BL) and follow-up coronary artery tree (CAT-FU) as smooth three-dimensional (3D) surfaces using a subdivision fitting scheme with the same coarse meshes by which the correspondence among these surface points is generated. Specifically, a rigid point set registration is used to transform the coarse mesh from the CAT-FU to CAT-BL. The plaque thickness and the thickness difference is calculated as the distance between corresponding surface points. To evaluate the registration accuracy, the average distance between manually defined markers on clinical scans is calculated. Artificial CAT-BL and CAT-FU pairs were created to simulate the plaque decrease and increase over time. Results For 116 pairs of markers from nine clinical scans, the average marker distance after registration was 0.95 +/- 0.98 mm (two times the voxel size). On the 10 artificial pairs of datasets, the proposed method successfully located the plaque changes. The average of the calculated plaque thickness difference is the same as the corresponding created value (standard deviation +/- 0.1 mm). Conclusions The proposed method automatically calculates local coronary plaque thickness differences over time and can be used for 3D visualization of plaque differences. The analysis and reporting of coronary plaque progression and regression will benefit from an automatic plaque thickness comparison. Show less
Warfarin has been showed to increase vascular calcification. Apixaban, a direct factor Xa inhibitor, has no interaction with vitamin K and its effect on coronary plaques is unknown. We randomized... Show moreWarfarin has been showed to increase vascular calcification. Apixaban, a direct factor Xa inhibitor, has no interaction with vitamin K and its effect on coronary plaques is unknown. We randomized and compared warfarin and apixaban on progression of coronary atherosclerotic plaques measured by coronary computed tomographic angiography in 66 subjects with non-valvular atrial fibrillation over the period of one-year follow up. There was significant higher total, calcified and low attenuation plaque volume in the group randomized to warfarin as compared to apixaban (all P < .05). Greater volume of total (beta(2) = 28.54; P = .03), low attenuation plaque (beta(2) = 3.58; P = .02) and calcified (beta(2) = 14.10; P = .005) plaque progression was observed in the VKA_group. Show less
Purpose: Improve mapping and registration of longitudinal view on histopathology vessels in a three-dimensional alignment procedure for postmortem quantitative coronary plaque analyses. This new... Show morePurpose: Improve mapping and registration of longitudinal view on histopathology vessels in a three-dimensional alignment procedure for postmortem quantitative coronary plaque analyses. This new procedure is applied and results shown using calcified coronary plaque analyses within post-mortem computed tomography angiography (PMCTA), optical coherence tomography (OCT) and the gold standard of histopathology.Results: In total, 338 annotated histopathology images were included, 166 PMCTA transversal images and 285 OCT images were aligned in the comparison. The results from the comparison using the alignment procedure showed overall that the calcified plaques seem to be overestimated by PMCTA and underestimated by OCT.Conclusions: The 3D fusion approach, aligning the images of PMCTA, OCT and histopathology as gold standard allowed for a slice-based comparison of the different modalities. The results showed that PMCTA overestimates the calcified plaques while OCT underestimates these, compared to histopathology. (C) 2018 Elsevier Inc. All rights reserved. Show less