A single-coil-based method for electromagnetic interference reduction in point-of-care low field MRI systems

Abstract

One of the main challenges for point-of-care (POC) MRI systems is electromagnetic interference (EMI), since such systems are intended for use outside conventional Faraday-shielded rooms. Many methods have been proposed based on EMI detection via sensors external to the MRI system, followed by different types of signal processing to reduce artifacts in the image. Although these methods can be very effective, they do increase the complexity of the overall system, and introduce more potential failure points for sys-tems designed for challenging environments. In this work we introduce a new method that does not require external sensors, but rather uses the "MR-silent" mode of an RF coil to detect the EMI, followed by simple subtraction from the signal from the "MR-active" mode. This method can be performed post-acquisition if there are two receive channels available, or as demonstrated here can operate with a single -channel receive detection system with the addition of a simple passive 180 degrees power splitter/combiner into the receive chain. Proof-of-concept in vivo results show that a reduction in the standard deviation of the EMI up to -97 % is possible, with average values -90 %.(c) 2022 The Authors. Published by Elsevier Inc. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).